Tungsten Oxide Insulation Material Can Make The Sun Room Cool in Winter and Cool in Summer
If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: firstname.lastname@example.org
What is tungsten Oxide?Tungsten dioxide has the molecular formula WO3 with a weight of 2318.5.
It is a form of tungsticanhydride. Tungsten dioxide is not produced in industrial production. The tungsten-trioxide salts are classified according to their content in tungsten.
Tungsten Trioxide is a powdery pale yellow triclinic crystal. Once the temperature reaches 740 deg C it changes into an orange tetragonal crystalline. In air, it is stable, with a melting point of 1473 deg C and a boiling point higher than 1750.
Tungsten Trioxide is one of the most stable tungsten oxydes. It is not soluble in water or inorganic acids except hydrofluoric. It is soluble with hot sodium hydroxide solution, ammonia and ammonia in order to form soluble-tungstate. If the temperature is greater than 650 deg C it can reduce by H2, but at 1000-1100 C it can be further reduced by C to get tungsten.
The application of tungsten dioxide transparent insulation material
Smart homes make home life safer, more comfortable and more convenient. The smart home also saves energy and is environmentally friendly. So, it's not surprising to see the smart sunroom. One of these is the so-called "intelligence", which breaks the sun room into two parts: summer, like a fire stove and winter, like a refrigerator. Transparent semiconductor materials like tungsten oxide transparent materials are a good way to make the sunroom cool in the summer and warm in the winter. My opinion is that it's not necessary to install floor heating and air conditioning equipment. The best solution to heat insulation in the sunroom is to start at the roots.
This concept of smart homes has already permeated our minds and is being applied everywhere! Unfortunately, this author hasn't been able live an intelligent lifestyle. This led to the classic home scene: the author would go out and come back halfway. Then, she'd remember something, did I lock my door? Is your air conditioner turned off? You cannot survive the day if you do not go back to confirm. But go back, and you'll be late to work! What about changing to the smart home scenario? ----After you lock the front door, turn the scene to unmanned, shut off the power of the terminal blocks, and check the status from the app at any time. It is easy to use, and it makes people feel more at ease.
The switch to the smart room is a similar experience. Some sunrooms are now using Low-e glasses. Researchers tested the blocking of ultraviolet rays and near-infrared radiation by glass coated with nano-tungsten dioxide coating, Low e glass, glasses with heat-insulating films, hollow tempered and single-sided glass. The glass coated with nano-tungsten dioxide has an infrared blockage rate of 91%. 2. Low-e glass has an infrared blocking percentage of 62.8% and a UV blocking percentage of 56%. 3. The infrared blocking percentage of glass with heat-insulating films is 59%, while the ultraviolet blocking percentage is 99.7%. 4. Hollow tempered glasses have an infrared-blocking rate of 34.2%, and an ultraviolet-blocking rate of 23.5%. 5. The infrared blocking percentage of single-sided glasses is 12.4%, and the ultraviolet blocking is 13.5%.
As can be seen by the data, single-sided tempered glass with nano tungsten oxide coating has the best infrared blocking ability. Single-sided tempered glass with thermal film and nano tungsten oxide have the best ultraviolet blocking ability. Coated single-sided glass. However, industry insiders say that because UV light has a bactericidal effect, and most people need to take pictures of the sun to function properly, it's not good to have high UV blocking. It is well-known that solar radiation supplies energy to all human activities on Earth. The amount of infrared, ultraviolet, and other rays that are present in sunlight is important. In general, the scientifically-recommended permeability rate is around 10%. In terms of health and energy savings, using nano-tungsten oxide-coated insulating glass makes the most sense.
It is clear that tungsten oxide is a transparent insulation material with two issues to solve urgently when building energy-saving windows: Transparency is defined as the ability to transmit light. It also meets lighting requirements. High barrier for the near infrared. This reduces energy consumption by blocking the radiant sun's energy.
The tungsten-oxide transparent heat insulating film is an environmentally friendly, water-based material that can be painted to a thickness as low as a few nanometers. This allows it to have the "warm winter, cool summer" effect without the need for air conditioning. The tungsten oxide transparent heat insulating material is also a great option for insulation. . These materials include tungsten bronze as well as ITO, ATO FTO.
Tungsten-oxide insulation is not an "black technology", it is the result of technological and scientific development. According to the author, in today's advocacy for "energy conservation and emission reduction" as well as "taking a path towards sustainable development", these transparent insulation materials will receive more and greater attention.
Tech Co., Ltd., a professional tungsten-oxide manufacturer, has over 12 years of experience in chemical research and product development. Contact us if you need high-quality tungsten oxide.
Send a request