Trending

News

  • 0
  • 0

Production Technology and Market Prospects of Sodium Silicate water absorption silica gel

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



Technical Parameters of Powdered Split Second Sodium Silicate (CAS 1344-09-8)

(Technical Parameters of Powdered Instant Sodium Silicate (CAS 1344-09-8))

Keep in mind: We can also tailor sodium silicate powder with moduli of 2.45, 2.5, and 3.4 according to your needs.

Our Range of Sodium Silicate Moduli

We provide powdered split second sodium silicate with moduli varying from 2.0 to 3.3. Furthermore, we can personalize salt silicate powder with moduli of 2.45, 2.5, and 3.4 to satisfy your specific needs.

Intro

With a growing worldwide emphasis on environmental protection and sustainable growth, sodium silicate, additionally known as water glass or soluble glass, has gathered considerable rate of interest in different sectors owing to its varied uses. This not natural compound acts as a crucial component in construction, papermaking, and cleaning agent manufacturing. Just recently, standard phosphorus-based cleaning agent ingredients such as salt tripolyphosphate (STPP) have been gradually eliminated due to their negative effects on marine ecological communities. In this context, the requirement for effective and eco risk-free options has actually come to be urgent. Salt silicate, with its one-of-a-kind features, has actually stepped into the limelight as an appealing choice.

Market Opportunities

1. International Demand Fads

The global manufacturing of focused artificial detergents has seen consistent growth, specifically with the climbing share of ultra-concentrated powders. It is approximated that at the very least 230,000 lots of salt silicate were required in 2000 alone to satisfy market demand. Given the existing minimal international supply, there is a substantial space between supply and need, showing substantial capacity for development. As customers' demand for top notch and environmentally friendly products increases, the market for salt silicate is anticipated to expand better.

2. International Competitive Landscape

Contrasted to similar products created globally, Chinese-manufactured sodium silicate often supplies an extra competitive cost and equivalent or perhaps premium top quality. For example, the FOB rate of sodium silicate in the United States is approximately $51.15 per 100 pounds, while rates in Europe are even higher. This expense advantage settings Chinese producers highly in the international market. By constantly introducing and improving item quality, Chinese suppliers have the possible to record a larger share of the international market.

Summary of Sodium Silicate

Salt silicate is a substance created from silicon dioxide (SiO ₂) and salt oxide (Na ₂ O), normally stood for by the formula Na ₂ O · nSiO ₂, where n differs depending upon the particular type. It is defined by good solubility, a high pH degree, and exceptional cleansing residential or commercial properties, making it a perfect cleaning agent additive. Beyond its use in detergents, salt silicate is commonly made use of in the building and construction sector, such as in waterproofing products and sealants. In the paper sector, it enhances the stamina and smoothness of paper. Furthermore, it locates applications in textile dyeing, oil extraction, and various other areas.

Production Process

1. Raw Material Prep work: The preliminary action entails choosing appropriate raw materials, including silica sand or soluble glass, together with caustic soda.

2. Dissolution Phase: The raw materials are combined and heated to a suitable temperature level to help with dissolution, making certain comprehensive mixing of all elements.

3. Formation Control: Certain problems are controlled to promote the development of desired crystal frameworks in the remedy. Temperature level and stress parameters have to be precisely handled during this stage.

4. Filtration and Purification: To make certain the pureness of the final sodium silicate item, a plate and structure filter press is employed to get rid of unwanted dampness and contaminations.

5. Drying and Developing: Spray drying out innovation is used to decrease the wetness content even more, resulting in a powder type that is very easy to store and transportation.

Cost-Benefit Analysis

From an economic point of view, the production of sodium silicate offers clear cost advantages. For a plant with an annual capability of 5,000 tons, the expense malfunction is as follows:

1. Variable Expenses: About $346.71 per load, including resources (silica sand/soluble glass and caustic soft drink), power consumption (electrical power and fuel), and labor costs.

2. Fixed Expenses: Around $141,400 yearly, covering devaluation of set properties, maintenance, monitoring fees, funding passion, and other expenses.

3. Total Costs: The combined complete price is approximated at $385.71 per ton.

4. Sales Income: With an approximated market price of $642.86 per lot, the revenue margin per lot would be approximately $257.15.

( sodium silicate)

5. Economic Perks: The job might produce an annual revenue of around $3.21 million, adding approximately $1.29 million in tax obligation earnings.

This cost-benefit evaluation suggests that salt silicate not only supplies significant technological benefits however is additionally extremely financially feasible. For manufacturing business, investing in the production and promo of salt silicate can yield considerable economic returns while boosting their business social responsibility photo.

Final thought

In summary, salt silicate, with its remarkable technical efficiency and low manufacturing costs, holds terrific potential as a replacement for typical phosphorus-based additives. Because of significantly stringent ecological guidelines and the expanding consumer demand for top quality, environmentally friendly products, accelerating the research, growth, and commercialization of salt silicate will be a crucial vehicle driver in the change of the worldwide cleaning agent industry. For financiers, entering this area not just adds to company social duty yet also assures appealing economic returns and societal benefits. With continuous technological improvements and an expanding market, the prospective uses salt silicate are considerable and quality further examination and growth by sector stakeholders and research bodies.

TRUNNANO is a supplier of Sodium Silicate Materials with over 12 years of experience in nano-building energy conservation and nanotechnology development. It accepts payment via Credit Card, T/T, West Union and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea. If you want to know more about water absorption silica gel, please feel free to contact us and send an inquiry(sales5@nanotrun.com).

All articles and pictures are from the Internet. If there are any copyright issues, please contact us in time to delete.

Inquiry us

Advantages and Disadvantages of Preparation Methods of Manganese Diboride

High Purity 3D Printing Nickel Alloy IN718 Powder

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

Supply Magnesium Granules Mg Granules 99.95%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

High Purity 3D Printing 304 Stainless Steel Powder

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

Our Latest Products

Advantages and Disadvantages of Preparation Methods of Manganese Diboride

Study on properties of manganese diboride:Crystal structure and chemical bondingManganese diboride belongs to the hexagonal crystal system with the space group P63/mmc. In the crystal structure, manganese atoms occupy hexagonal close-packed positions…

High Purity 3D Printing Nickel Alloy IN718 Powder

TRUNNANO is a reliable supplier for high purity 3D Printing Nickel Alloy IN718 Powder.…

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

TRUNNANO is a reliable supplier for high purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%.…