What is Molybdenum Disilicide Powder?The appearance molybdenum di-silicate The gray metallic solid has a melting point around 2030degC, a mass density of 6.26g/cm3, is insoluble with most acids but not hydrofluoric or nitric. Its properties include a low coefficient of thermal expansion, good thermal conductivity by electric current, dual metal-ceramic characteristics, high temperature oxidation resistance and others. The surface of the material can be coated with a silica-based passivation layer at temperatures above 1000°C to prevent further corrosion. This is accompanied by a high Young's Modulus. It's brittle even at low temperatures, and it loses its creep resistance above 1200. MoSi2 can be classified into different shapes such as straight rods, U shaped rods, three phase rods, gun rods, five segment rods, groove rods, single threaded rods, double threaded rods and other specifications.

Molybdenum disilicide powder: Main applications
Molybdenum has many applications, including electric heating elements, integrated electro-film, composite reinforced material, wear-resistant material, structural ceramic connections materials and more. Molybdenum-based heating components are widely used in electric furnaces for glass, ceramics and steel.
Production of Molybdenum
Molybdenum oxide can be reduced by Mo powder to produce molybdenum disilicate. By using either a hot or cold pressure system, two silicon-molybdenum parts are made. As a binder, you can use the batter, starch and glycerin if the molding technique is used. Dextrin, in the range of 2% to 4 %, was used to create the binder when forming using the extrusion technique. MoSi2 Products were fired between 15001900. Imagine that a small amount SiO2 was added to disilicate molybdenum. SiO2 melting forms a protective layer on the surface of molybdenum products disilicated at high temperature, thereby increasing the working temperatures of molybdenum silicates to 17101780. Cold-pressure products have poor mechanical properties. When under hot pressure, temperatures range from 1550 to 1750 degrees Celsius, while pressures are 9.8 to 78.5 MPa. The mixture is molybdenum with alumina.
Price of Molybdenum diilicide powder
Price of Molybdenum diilicide powder is also different. Market prices for Molybdenum diilicide powder are constantly changing. Our company's website has the current price for Molybdenum diilicide powder. We are always available to help you if you need us.
Molybdenum diilicide powder supplier
Technology Co. Ltd. , a leading global supplier of chemical materials with a high level of quality and reliability. It has been providing ultra-high-quality nanotechnology materials and chemicals for more than 12 year, including molybdenum Silicide. We offer high-quality, cost-effective Molybdenum Disilicide Powder. Contact us Or inquire at any moment.

Inquiry us