Hafnium Carbide, an inorganic material that has a high melting points is very resistant to wear, corrosion and oxidation. It can be used in environments between 1000-1100°C.
Particle Size: -325mesh
Hafnium Carbide HfC Powder:
Hafnium carbide HfC
This is a combination of hafnium, carbon, and other elements.
The melting point of this binary compound is approximately 3900°C. However, it is not resistant to oxidation and can oxidize at temperatures as low or as 430°C.
The HfO2 is a hard, black-gray, and brittle material. High cross-section absorbs the thermal neutrons. Resistivity 8.8mohm*cm. Used in nuclear reactor control rods. Preparation involves heating oil soot with H2 under H2 at 1900c-2300cc. It can be used to form the crucible for melting oxide and other forms of oxide.
The improved spark plasmasintering (SPS), device was used for ultrafine carbonized Ha powder by carbothermal reduction reactions of HfO2 at 1650°C. The powder contains a small particle size (about 125nm) and a low level of oxygen, less than 0.5%. Powder purity is greater than 99.9%, with Zr being the exception. It is 99.6% when powder contains Zr impurities. The low synthesis temperatures, the rapid heating/cooling rates, and the current influence of the improved SPS procedure reduce intermediate reactions. This also minimizes particle growth. New synthesis methods allow for the production of large amounts of HfC (>175 g/day). HfC ceramics of high relative densities (>96%) can be obtained by SPS sintering at 2300 degC for 30 minute under 100 MPa.
To receive the most current information, send us an inquiry
hafnium carbide price
Please fill out the form below if you wish to
buy Hafnium Carbide Powder
Hafnium Carbide HafC Powder Performance:
Hafnium Carbide powder is a gray metallic material. This is because it has the highest melting temperature of any compound. You can use it as an additive to cemented carbide, which has excellent characteristics like a lower and better thermal conductivity. This powder is also used widely in cutting tools, molds and rocket nozzle materials.
Technical Parameters of Hafnium Carbide HfC powder :
It is simple.
Is Hafnium Carbide HfC Powder made?
Hafnium Carbide powder Chemical Composition (%)
Please send me
You can prepare hafnium carbonide powder by reacting hafnium oxide and carbon at 1800-2500oC. In this case, it is necessary to take longer to get rid of all oxygen.
Hafnium carbonide is a dark gray, brittle liquid. This can be made by heating an alloy of elements or reacting hafnium trioxide with methane at 2150°C. You can obtain sufficient amounts of hafnium tetrachloride or metal sponge in the production of zirconium at large scales for use in nuclear reactors. Industrially, you can make hafnium carbonide from hafnium oxide or metal sponges at between 1500 and 1700C. It contains up to 0.1% carbon free (219) and almost all of the carbon expected (6.30%degC). This hafnium-carbidide compound is not true stoichiometric, but it only contains a carbon solution at one interstitial point of the face-centered cubic lattice.
Hydrofluoric acid will dissolve carbonization, but it is inert at room temperatures. At 250-500°C, carbonization is exothermic with halogen to create hafnium Tetrahalide. It also forms hafnium Oxide with oxygen at 500°C. At higher temperatures, the hafnium carbonide will lose some carbon due to hydrogen.
Hafnium Carbide Uses:
Hafnium carbonide (HfC), which has the highest melting temperature of any binary alloy, has many high-temperature uses. HfC is a suitable candidate for extreme high temperature applications like rocket nozzles or scramjet components. You can use carbonization in hard coatings. This is often done using processes like plasma spraying. HfC structural can also be used to make high-temperature components and thermal insulation materials.
Hafnium carbonide (HfC), which has a melting point of 3890degC above, can be used as refractory binary compounds. HfC or NBC may also be used in reactors as refractory materials. Ta4HfC5 mixed carbide has the highest melting temperature at 4215degC.
1. Hafnium carbide can also be added to cemented caride. This is widely used in the fields of mold making and cutting tools.
2. Hafnium carbonide can be used as rocket nozzle material.
3. Hafnium-carbid is used for nuclear reactor control rods. It's an excellent metal to make nuclear reactor controlrods.
4.Used for making ultra-high-temperature ceramics
5.Reactant used to synthesize an organometallic hafnium-containing polymer
Hafnium carbide HfC powder Storage Conditions
Hafnium Carbide HfC Pulp should be stored dry, cool, and sealed.
Shipping Hafnium Carbide Powder - Packing and Shipping
You can pack it in two plastic bags with the inside.
Hafnium Carbide Powder Packaging: Vacuum packing 100g, 500g and 1kg/bag. 25kg/barrel. Or as you request.
Hafnium Carbide HfC Powder shipping:
Could be sent by sea or air as soon as possible after receipt of payment.
Robocup2009 advanced materials Nano Technology Co. Ltd.
High-quality products are what you want
Please feel free and contact us to make an enquiry. (