High Purity Tungsten Carbide WC Powder Cas 12070-12-1, 99%

About Tungsten Carbide WC Powder:
Tungsten carbide A mixture of carbon and titanium. Tungsten carbide formula What is the WC? Tungsten carbide molecular Weight It is 195.85
Tungsten carbide color: Although the most basic form is a grayish powder, it can still be used in cutting and jewelry tools.

Young's modulus, which measures 530 to 700 GPa (77,000-102,000 ksi) is approximately twice the stiffness of steel. It is also twice as dense as steel. This is close to equaling lead or gold. Its hardness can be compared to corundum (a -Al2O3). For polishing or finishing, only diamond powder and cubic boron Nitride are allowed.
Tungsten caride is used also to create tungsten carbide rings , tungsten carbide mens rings , tungsten carbide wedding bands , tungsten carbide mens wedding bands, etc. Because tungsten carbide rings price It's cheaper than gold and platinum rings. Tungsten carbide is also more scratch resistant than any metal. There are many styles and colors available. black tungsten carbide rings , tungsten carbide rings gold .

Black tungsten carbide This hexagonal crystal has metallic luster, hardness and a similar appearance to diamonds. Tungsten carbide is an excellent conductor of heat and electricity. Tungsten carbide can't be dissolve in water or hydrochloric and sulfuric acids. However, it is easily soluble and dissolves in hydrofluoric and nitric acids. Tungsten carbide in its pure form is very fragile. However, if there are small amounts of cobalt, titanium and other metals, it can be made less brittle. Tungsten carbide can be used to cut steel. To increase its anti-knock capability, it is sometimes combined with titanium carbide (or tantalum) or their mix. Tungsten carbide has a chemical stability. Tungsten powder is used for cemented carbide production.

To receive the most current information, send us an inquiry The price for tungsten carbide Please fill out the form below if you wish to buy tungsten carbide Get powder in bulk

Tungsten carbide powder for WC performance:
These black hexagonal crystals have a melting point of 2870 degrees C, +- 50 degrees C, and boiling point of 6600 degrees C. They can be dissolved in mixtures of hydrofluoric acid and nitric acids as well as in aqua regia.

Tungsten carbide powder technical parameters

WC	Molecular Weight	Total Carbon	No Carbon	O	As	Bi	Ca	Cd
99.95	195.86	6.13-6.18	0.05	0.05	0.001	0.0003	0.0015	0.0005
Cr	Cu	Fe	K	Mn	Na	Mo	P	Pb
0.005	0.0003	0.015	0.002	0.001	0.002	0.003	0.001	0.0003
Sb	Si	Sn	Ti	V	Ni	Co	S	Al
0.0005	0.0015	0.0003	0.001	0.001	0.005	0.01	0.001	0.001

It is simple. Tungsten Carbide WC Powder produced?
Utilizing metal tungsten or carbon as raw material, tungsten powder of an average particle size between 3 and 5 mm is mixed dry with a ballmill, then press-molded and put into a graphite resist furnace. Or, you can heat it to 14001700 using an induction furnace. Preferably 15501650. W2C is produced in the hydrogen stream and reacts at high temperatures to create WC. Or, first, tungsten Hexacarbonyl can be thermally broken down at between 650 to 1000°C in CO, to create tungsten dust, then it is reacted at 1150°C with carbon monoxide to form WC. W2C is possible at higher temperatures than these.
The chemical reaction formula
2W+C = W2C
W + C = WC
Hydrogenated tungsten trioxide (WO3) is then reduced to make tungsten dust. The average particle size for tungsten is 35mm. Next, press-form the mixture of tungsten and carbon black under pressure of approximately 1t/cm2 You will need to heat the block of pressurized material in a graphite pan (or crucible) at about 14001700, or more preferably 15501650 in hydrogen stream. This can be done using pure hydrogen and a low dew point (using a graphite resistance furnace) or induction electric furnace. Carburizing will give you WC. Since W2C can be generated from the beginning of the process, the reaction begins around the tungsten particle. Because the reaction temperature is very low, the unreacted and intermediate W2C will remain. The reaction must then be heated to the high temperatures mentioned above. The raw tungsten particle size should determine the temperature. A reaction can be initiated at temperatures between 1550-1650oC for large particles that have an average size of 150mm.
The chemical reaction formula
WO3 + 3H2 = W + 3H2O
2WO3 + 3C - 2W + 3CO2
2W+C = W2C
W + C = WC

Applicaciones Tungsten Carbide WC Powder:
Tungsten caride is used extensively in the manufacture of high-speed cutting tools and furnace structural materials. This is used in the manufacture of cutting tools, wear resistant parts, meltingcrucibles for metallics such as cobalt, copper and bismuth and wear-resistant semiconductor film.
Tungsten carbide is used for super-hard material as well as wear-resistant materials.
Tungsten carbide can be combined with many other carbides to create a strong solution. WC-TiC-Co has been used extensively to create cemented carbide tools.
Tungsten carbide can also be used to modify NbC–C and TaC–C ternary-system carbides. It can decrease the sintering temperature while maintaining excellent performance. It is also used in aerospace.
Tungsten carbide or (WC) can also be made by mixing tungsten anhydride and graphite at 1400-1600 degrees Celsius in a reducing environment. You can make dense ceramic products by either hot pressing or hot isostatically pressing sintering.
Tungsten caride (WC), powder, can also be used in the production of high capability superfine or nano-crystalline horniness alloys.

Tungsten carbide powder storage conditions:
Tungsten carbide powder dispersion and uses effects should be considered. Niobium carbide NbC Powder must be stored in vacuum bags and kept dry in a cool place. NbC powder shouldn't be exposed to stress.

Packing and Shipping Tungsten carbide WC granules :
We offer many packing options that are dependent on the amount of niobium-carbid NbC powder.
Tungsten carbide WC powder packing: You can vacuum pack 1kg/bag, 25kg/barrel or according to your requirements.
Tungsten carbide WC powder shipping: After receipt of payment, items may be shipped by air or sea as soon as they are possible.


Robocup2009 advanced materials Nano Technology Co. Ltd.
We can provide high-quality, reliable tungsten carbide powder. Please contact us to send us an inquiry. ( brad@ihpa.net )