High Purity Nickel Ni powder CAS 7440-02-0, 99%

Nickel powder is a form of gray-black or gray-gray powder. The chemical formula for nickel powder is Ni. It is insoluble in water and ammonia concentrated Nitric Acid. However, it is slightly soluble in dilute Nitric Acid.

Nickel Ni Powder: Nickel dust can be described as a grayish-black or gray-gray powder. Nickel chemical formula refers to Ni. It is conductor, insoluble with water, ammonia and concentrated nitric. It reduces nitric and finely pulses hydrochloric, and sulfuric acids.

You can use nickel powder in and -carbonyl nickel powder to make conductive inks.

There are many metallic pigments that contain metallic nickel as the main ingredient, like nickel powder and flake-nickel powder. For the decomposition of this former, you need to distill and purify carbonyl Nickel [Ni(CO),4] vapor. Instead of using gas additives, carbon monoxide can control the temperature. To form nickel particles, reagents such as oxygen and nitrogen are used. After that, carbon monoxide can be flushed in with carbon dioxide gas. Finally, the surface oxygen of the particles can be controlled to 0.065%.

Nickel can be described as a chemical element. The symbol for it is Ni. Its atomic number 28. It's a bright, shiny and silvery-white metallic with a slight golden tint. Nickel is a hard, ductile transition metal. Pure nickel powder can have significant chemical activity and the highest reaction area. But, the reaction of larger nickel flakes with air is slower than for smaller ones. An oxide layer forms at the surface of nickel flakes and stops further corrosion (passivation). Even so, very little pure nickel can still be found beneath the crust of the earth. It is usually located in supermafic rocks, and in larger nickel-iron meteorites.

The nickel element one of four elements at room temperature that is ferromagnetic (the others are cobalt and iron). Alnico permanent magnets that are partially made of nickel offer a moderate strength compared to rare earth and iron-based permanent mags. Modern metals can be found in alloys, which is why they are so valuable. Around 68% worldwide's total production of stainless steel is made. A further 10% of stainless steel is used to make nickel-based, copper-based, alloys. Another 3% goes for casting. The remaining 9% go for electroplating. It is used in the vehicle. Nickel can also be used in special chemical manufacturing processes such as cathodes, batteries, metal surface treatments, catalysts, and hydrogenation. Certain microorganisms, plants, and animals that possess enzymes with Nickel as their active site require nickel to survive.

Nickel powder for sale:
Jatujakguide is an Nickel Metal Powder supplier. We supply fine nickel powder as well as alloy powder.

Nickel Ni Powder CAS 7440-02-0 -
English name: Nickel flake, .
The Molecular Formula: Ni
Properties: Unstable gray powder. Easy to oxidize with moist air.

How Nickel Ni Ni powder is produced?
Nickel powder is produced in many different ways. It depends on what size particles you need and how morphologically they are made. The nickel carbonyl method is one of most commonly used to make nickel powder. This method, known also as the Mond Process, allows for controlled morphology, tolerances, and production of powders. Impure nickel is also refined by the nickel carbonyl procedure. To form nickel carbonyl, solid nickel reacts with carbon monooxide. After the mixture has been heated, it is decomposed of its metal-carbonyl compound to make pure nickel and carbon monoxide. Thermal shock decomposition is able to produce nickel powders that are finer and more refined.

An alternative method for producing nickel powders is electrolysis. It involves passing an electron through an electrolyte with dissolved nickel metal, and then allowing the nickel dust to form on a cathode. Electrolytic metal powders, which are formed this way, are also known as "electrolyte metal powders". They can be very dense with complex morphology and thus very conductive. Variable operating parameters can be used to control particle sizes and morphology. Additives that influence the deposition of powder on cathodes can also be used to adjust the results.

Nickel Ni pul .
Nickel powder is an opaque black metal powder that is malleable and hard. The quality of ultra-fine powders has improved over time. Be sure to pay attention. The widespread use of pure nickel in ultrasonic, sonar, and coinage systems is a testament to its versatility.

You can find many nickel-based alloys such as superalloys made from nickel, nickel and nickel-based anti-corrosion alloys. There is also nickel-based wear resistance alloys. These alloys can be used for aerospace and electronics as well shipbuilding. In powder metallurgy, nickel powder is used.

Introduction of nickel powder (metal-based alloy powder) for diamond tools: The quality of diamond cutting blades, cutter head, grinder wheels and thin-walled drill bits is determined by the metal belt. Once the cut diamond is determined, the most important factor to consider is its metal bond. Although both nickel and cobalt are acceptable as main binders, the cost of cobalt is much higher.

When diamond tools are described as the matrix, it refers the package, or the metal sintered diamond body. The matrix usually includes a range of metal elements. Usually, low melting point metal powder is used to binder the diamond.

The majority of matrix bonding material for diamond thin-wall drilling bits and cutting disks are made from nickel powder.

Metal material processing is done mainly with diamond abrasives. Most of the machinery used to grind automobiles or motorcycles also uses nickel powder. This includes carbonyl Nickel powder, electrolytic Nickel powder, and reduced Ni powder.

Storage conditions for Nickel Ni powder

It is important to keep this product in a dry, cool environment.

Shipping and Packing of Nickel Ni powder
There are many options for packing, which depend on the amount of nickel Ni.
Nickel Ni powder packaging, vacuum packed, 100g to 500g or 1kg/bag at 25kg/barrel. Or as you request.
Nickel Ni Powder Shipping:could you ship by sea or by air?as soon after receipt of payment.

Nickel Ni Powder Properties

Other Titles Nickel particles, Nickel microparticles, Nickel micropowder, Nickel micro powder,
Nickel micron powder, Nickel submicron powder, Nickel sub-micron powder.
7440-02-0
Compound Formula Ni
Molecular Weight 58.69
Appearance Unstable gray powder that is easily oxidized in moist atmosphere.
Melting Point 1455 degC
Solubility In Water N/A
Density 8.902 g/cm3
Purity N/A
Particle Size N/A
Boling Point 2732 degC
Specific Heat 0.44 kJ/kg*K
Thermo Conductivity 90.9 W*m-1*K-1
Thermal Expansion 13.4 um*m-1*K-1 (25 degC)
Young's Module 200 GPa
Exact N/A
Monoisotopic N/A

Nickel Ni powder Safety & Health Information

Safety Notice Danger
Hazard Statements H228-H317-H351-H372
Flashing Point Non applicable
Hazard Codes N/A
Risk Codes N/A
Safety statements N/A
RTECS # N/A
Transport Information UN3089 – class 4.1, PG 2 and EHS. Metal powders, flammable, non-toxic, Hi.A.,S
WGK Germany 2

Inquiry us

NEXT Elementary

Our Latest Products

EHES Sodium 2-ethylhexyl Ether Sulfate, 50%

is a reliable supplier for EHES Sodium 2-ethylhexyl Ether Sulfate.…

Concrete Superplasticizer PCE Powder

Polycarboxylate Superplasticizer is a high-performance water-reducing agent and a cement dispersant in the application of cement concrete. Widely used in highways, bridges, dams, tunnels, high-rise buildings and other projects.…

Concrete Foaming Agent Lightweight Concrete Solutions

Concrete Foaming Agent Lightweight Concrete Solutions,Concrete Admixtures,,…

0086-0379-64280201 brad@ihpa.net skype whatsapp