High Purity Cuprous Oxide Cu2O pwder CAS 1317-39-1, 99%

Cuprous oxide can be described as a bright red powder. It is nearly insoluble in water and is proportioned to divalent copper or copper in acidic solution. Then, it slowly oxidizes into black copper dioxide in moist atmosphere. Purity: 99%
Particle size: 50nm, micron

Information about Cuprous Oxide cu2O powder:
Curous oxide or cu2o are oxides of monovalent copper.

Which chemical name should be used for Cu2O?
All Cu2O chemical names are correct: Copper (1+) oxidecopper, Cuprous oxide or copper oxide

Cu2O (a bright red powdery liquid) is almost insoluble when dissolved in water. This metal reacts poorly to copper elements and divalent copper in acidic solution. In humid environments, it slowly turns black. Copper oxide. Cuprous oxide is used primarily in antifouling paints on ships' bottoms (used to kill marine low-level animals), as well as insecticides and various copper salts. It also helps with the preparation of copper alloy plating solutions and copper plating.

The cuprous oxide is safe to use if it's stored according to its instructions. Copper salts are not produced by cuprous oxide in dilute sulfuric and dilute nitric. It will rapidly turn blue when exposed to the atmosphere.

While cuprous oxide remains stable in dry conditions, the metal will oxidize slowly in humid environments to create copper oxide. This makes it an excellent oxygen scavenger. Cuprous oxide cannot be dissolved in water. It dissolves in the presence of concentrated hydrohalic acids and aqueous ammonia. It can be easily dissolved in an alkaline solution.

For sale
Abbaworld is an international Cuprous Oxide supplier. You can send us an inquiry regarding the current Cuprous Oxide price anytime.

How does CuO differ from Cu2O?
Cu2O cuprous or CuO .
Cu2O can be obtained from a solution of copper metal oxide or an oxidation (II), solution of the sulfur dioxide solution. The copper metal metallurgical method was used to obtain CuO. Copper can be found in many preservatives for wood. You can use it to create different glazes.

Is cuprous oxide dangerous?
Consumption of toxic substances if swallowed. Ingestion of skin may cause harm if it is not removed from the skin. May cause skin irritation. Eye irritation can cause discomfort.

Cuprous oxide Cu2O powder Performance:
Cuprous oxide (also known copper I Oxide) is an inorganic compound that has the formula Cu2O. It is the primary copper oxide. This solid brown-red powder can be used in antifouling sprays.
Cuprous microparticles is a solid, stable red powder made by the reduction Cu2+ solution. They contain Cu+ ions with linear coordination to oxygen.

Technical Parameters of Cuprous Oxide cu2O powder:

As

Cd

Hg

Pb

Ni

Bi

Zn

Mn

Sb

Te

Ag

Fe

<10ppm

<10ppm

<10ppm

<10ppm

<90ppm

<10ppm

<54ppm

<47ppm

<10ppm

<10ppm

<24ppm

<170ppm

How does Cuprous Oxide cu2O Powder be made?
Here are some of the most common methods to make cuprous oxide.
1. Dry method. The copper powder can be mixed with copper dioxide after eliminating impurities and put into a calcining furnace. It will then be heated to 800-900 degC, which is used to make cuprous oxide. Once the powder is removed, you can use a magnet for mechanical impurities to be absorbed. Then, pulverize to 325 mm to make cuprous oxide. When copper sulfate has been used as the source material, it is necessary to first reduce the copper with iron. All subsequent reactions are exactly the same as for copper powder.
2. Glucose reduction: Copper sulfate solution is added to glucose, and then the solution is combined with sodium hydroxide to create the cuprousoxide. The cuprous oxide is extracted by filtering, drying, and crushing the product.
3. An electrolysis procedure in iron. The anode is the copper cast plate. The cathode is the red copper plates. KOHOL CHORE is used to add potassium and sodium to the electrolyte. Electrolysis can be performed at a temperature of 70-90 degrees Celsius, with potassium chromate between 0.3 and 0.5g/L, current density 1500 A/m2 and pH 8, to produce cuprous oxide.
4. Method to reduce hydrazine levels: Mix 35mL 20% Hydrazine in 50mL of high-concentration Copper acetate aqueous water. This will lower the copper divalent ions. It turns green immediately and produces nitrogen gas. The solution will turn yellow to an orange-yellow color and eventually precipitate. It was then washed with water and ethanol. Excessive hydrazine may cause cuprous oxide to become metallic copper. Therefore, it is important that the amount of hydrazine used should be kept in check. There are many ways to make Copper(I). The most common method is to oxidize copper metal. This process results in 4 Cu+ O2 and 2 Cu2O. The rate at which this happens and the further oxidation into copper oxides can be affected by acids and water.
5. Film solution glucose reduction synthesis: The 50g and 75g of copper sulfate pentahydrates are respectively dissolve in 200mL each cold water. After cooling to room temperature, the solutions are then combined. For an alkaline mixture, 75g of sodium hydroxide were also dissolved into 200mL of water. As you stir the mix, add the alkali solutions slowly to it. Keep the solution at a constant temperature so the solution doesn't turn too dark. To precipitate red cuprous dioxide, heat the divalent copper sodium solution to boiling. Then, mix 10% glucose with water until the solution turns blue. It should be boiled in 1L cold water. After it has cooled, you can add more water.
6. For direct oxidation, you can use platinum wire to attach metallic copper to a tubular electric furnace. After heating it to 1000C for 24 hrs in a nitrogen atmosphere with 1% volume fraction of oxygen, cuprous oxide will be formed. You can also heat the mixture of metallic copper with copper oxide in a vacuum tube for 5 hours.

Cuprous Oxide uses / Cu2O uses:
Cupric oxide is used to create blue, red and green glazes in ceramics. Also, it is not recommended to be used as an animal food supplement. Because of its low bioactivity it is very difficult to absorb copper. Cuprous oxide is also useful in welding with copper alloys. Cuprous oxide can be used to make marine coatings. It's a common pigment, fungicide, and antifouling ingredient. What is the purpose of cuprous oxide?
1. It is suitable for use in pesticides.
2. This product is safe for use with antibacterial fabrics and clothing.
3. Cuprous oxide also works well as an agricultural pesticide.
4. This antiseptic is ideal for ship primers that prevent microorganisms and pollution.
5. It is used to make various copper salts, analytical reagents, and other chemicals.
6. As a catalyst in organic synthesis.

Cuprous oxide Cu2O powder storage condition:
Cuprous Oxide Cu2O Powder should be kept in a dry and clean environment. It should not be exposed to air.

Packing & Shipping cuprous oxide Cu2O powder
You can pack it in two plastic bags with the inside.
Packing of cuprous oxide Cu2O powder: vacuum packaging, 100g to 500g or 1kg/bag at 25kg/barrel. Or as you request.
shipping: could ship out by sea, air or express, once the payment has been received.



Abbaworld advanced materials Nano Technology Co. Ltd. (Abbaworld), is a trusted global supplier and manufacturer. They have over 12-years of experience in providing high-quality chemical products and Nanomaterials.
Send us an enquiry if you're looking for Cu2O powder of high quality. (brad@ihpa.net)

Copper (I) Oxide Properties

Other Titles Red copper oxide, cuprous oxide, dicopperoxide, and Cu2O powder
1317-39-1
Compound Formula Cu2O
Molecular Weight 143.09
Appearance A brownish-red powder
Melting Point 1235 degC
Boiling Point 1800 degC
Density 6.0 g/cm3
Solubility of H2O N/A
Exact 141.854 g/mol

Health & Safety Information

Signal word Alert
Hazard Statements H302 + H332-H319-H410
Hazard Codes Xn, N
Risk Codes 22-50/53
Safety statements 22-60-61
Transport Information UN 3077 9 / PGII

Inquiry us

Our Latest Products

High Purity MAX Special Ceramics Material Titanium Silicon Carbide Ti3SiC2 Powder,99%

is a reliable supplier for high purity MAX Special Ceramics Material Titanium Silicon Carbide Ti3SiC2 Powder,99%.…

High Purity Niobium Carbide NbC Powder CAS 12069-94-2,99%

is a reliable supplier for high purity Niobium Carbide NbC Powder CAS 12069-94-2, 99%.…

High Purity Antimony Selenide Sb2Se3 Powder CAS 1315-05-5 99.9%

is a reliable supplier for high purity Antimony Selenide Sb2Se3 Powder CAS 1315-05-5 99.9%…

0086-0379-64280201 brad@ihpa.net skype whatsapp