High Purity Zirconium Oxide ZrO2 powder CAS 1314-23-4,99.9%

Zirconium dioxide (chemical name: ZrO2), is zirconium's main oxide. It's a powder with an odorless, white color. Purity: 99.5%
Pebble size: 20nm - 200nm

Zirconium oxide ZrO2 powder -
Zirconium dioxide also known as Zirconia or zirconium , is a white-crystalline oxide of zirconium . The mineral baddeleyite, which is a monoclinic crystal structure, is the most common form. The cubic zirconia dopant stabilized cubic structured zirconia can be made in many colors and used as a gem or a replica of a diamond.
Zirconia does not react chemically. Concentrated sulfuric acid or hydrofluoric acid slowly destroy it. If heated, it becomes zirconium carbonide. If heated in chlorine with carbon, it becomes zirconium trichloride.
Zirconiumoxid has been one of the most researched ceramic materials. ZrO2 is a monoclinic crystal at room temperature, but transitions to a tetragonal structure and cubic at higher temperatures. When the structure shifts from tetragonal, monoclinic or cubic it causes a large volume change. This can cause cracking upon cooling at high temperatures.
It is possible to identify three types of phases. It is common to see higher symmetry at higher temperatures. The cubic phase is stable for a very small number of the ytrium and calcium oxides. Cubic is also the case for rare minerals like tazheranite (Zr Ti and Ca)O2. TiO2, with six-coordinated phases of titanium, is cubic. Monoclinic Zirconia has seven coordinated zirconium center. The zirconium-titanium atom is larger than the one in monoclinic zirconia.
ZrO2 bands are dependent upon the preparation and phase. Typical estimates range from 5 to 7 eV. Tetragonal zirconia Polycrystal (TZP) is an exceptional case of zirconia. It is made up of the metastable phase of zirconia and is therefore a special example of polycrystalline Zirconia.

If you'd like to order Zirconium O2 powder, please send us an inquiry.

Zirconium oxide ZrO2 powder performance:
Inactive zirconium dioxide chemically has high melting points, high resistanceivity and low coefficients of thermal expansion. This makes it an important ceramic insulating material, ceramic sunscreen material and ceramic high-temperature material. raw material. Band Gap is approximately 5 to 7 eV

Technical Parameters of Zirconium Oxide ZrO2 Powder :
Zirconium Oxide particle size: 200nm
Zirconium Oxide crystal monoclinic:
Zirconium Oxide purity: 99.9%
Fe2O3 content: <=0.003
SiO2 content: <=0.003
TiO2 content: <=0.03
Al2O3 content: <=0.002
Na2O content: <=0.001
CaO content = =0.002

How does Zirconium oxide ZrO2 Powder get made?
Stabilly Zirconia is used as an industrial refractory and is where most electric mete comes from. To the zircon fuse, carbon and stabilizable Calcium oxide were combined. The solution was used for the production of a solid solution. After that, stably Zirconia was made. The majority of stable, partially stabilized zirconia used for fine ceramics was prepared using wet.
It is also the most popular and widely used method. Pure water is used to dissolve the purified chloride Zirconium. Then, filter the insoluble matter and adjust the concentration of the solution. Add the cerium chloride solution or other rare earth metals, as well as ammonia Water Medium, for precipitation. Hot water was used to wash the precipitate. Then it was dried, filtered and calcined. You can make ultrafine zirconia dust by treating the calcined material.
To control how much stabilizer is used, partial stabilization of zirconia can be done. This is necessary to maintain stability. Partially stabilized zirconia is strong and resistant to thermal shock, so it has a wide range of applications in structural ceramics.

Zirconium Oxide ZirO2 powder:
Metal zirconium or zirconium compound, fire bricks/crucibles, high frequency ceramics, and abrasive material, as well as ceramic pigments. Zirconates can be used for piezoelectric ceramic products and daily ceramics.
Refractory
Zirconia fibers can be described as a polycrystalline refractory fibre material. Because of its high melting temperature, non-oxidation, and other excellent high-temperature characteristics, ZrO2 fibers have higher use temperatures that other refractory fibres like mullite, alumina, or aluminum silicate fibers. Zirkonia fibers can be stored for extended periods in super high temperature oxidation conditions above 1500°C. The highest temperatures are as high at 2200°C and 2500°C. Even 2500°C is able to retain a full fiber shape. Fiber material.
Gas turbine
A plasma spray zirconium oxide thermal barrier coating has made tremendous progress on-air gas turbines. This has been applied to turbine sections of gas turbines in a limited range. The coating is capable of reducing the temperature from 50 to 200°C of the hot-cooled member. This can greatly improve its durability, temperature control, and reduce temperature maintenance. This improves the engine's performance.
Zirconium Oxide Ceramic Material
The refractive value of zirconia, which is also large and has high melting points, is well-suited for use in the kiln sector. The products of piezoelectric ceramic are filters, ultrasonic water detectors and other such items. You can also find zircon tubes, industrial ceramic glazes and zircontiles for precious metals smelting. The nano-grade zirconia is also used to polish, glaze, and create high-temperature pigment matrix materials.
O Der Get get Ta Deal Do all Alle ALL All Homepage Durch dar Grund Dar them
Additionally, zirconia may be used for the production of enamel, white-hot gas masks and the white glass crucible. X-ray photography. Grinder material. The light source lamp is made from thick circuit capacitive material and piezoelectric crystal transducer formulations for infrared meters.

Zirconium Oxide powder storage conditions :
Zirconium Oxide ZrO2 should be kept dry, clean, and sealed.

Shipping and Packing of Zirconium oxide ZrO2 Powder :
You can pack it in two plastic bags with the inside.
Zirconium Oxide ZrO2 powder packing - vacuum packaging, 100g, 500g and 1kg/bag. 25kg/barrel. Or as you request.
Zirconium oxide ZrO2 Powder Shipping: is available for shipment by sea or air. Once payment has been received, shipping will be made by Express as quickly as possible.


Tfmpage advanced materials Nano Technology Co. Ltd. (Tfmpage), is a trusted supplier and manufacturer of chemicals and Nanomaterials. They have over 12-years experience providing high-quality chemical products, as well as Nanomaterials such as graphite powder.
Send us an enquiry if you're looking for Zirconium oxide powder of high quality. (brad@ihpa.net)

Zirconium Oxide ZrO2 Powder Properties

Other Titles Zirconia, Dioxozirconium, zirconium, dioxo-, Zirconium dioxide, Zirconium White, Zirconium(IV) oxide, Zircosol, Rhuligel, Zirconic anhydride, Diketozirconium
1314-23-4
Compound Formula ZrO2
Molecular Weight 123.22
Appearance Powder White
Melting Point 2,715deg C (4,919deg F)
Solubility In Water N/A
Density 5680 kg/m3
Purity >99%
Particle Size 325 mesh
Boling Point 4,300deg C (7,772deg F)
Specific Heat N/A
Thermo Conductivity N/A
Thermal Expansion N/A
Young's Module N/A
Exact 121.895 g/mol
Monoisotopic 121.94531 Da

Zirconium Oxide ZirO2 Powder Health & Safety Info

Safety Notice Alert
Hazard Statements H315-H319-H335
Flashing Point N/A
Hazard Codes N/A
Risk Codes N/A
Safety statements N/A
RTECS # ZH8800000
Transport Information NONH
WGK Germany nwg

Inquiry us

Our Latest Products

High Purity MAX Special Ceramics Material Titanium Silicon Carbide Ti3SiC2 Powder,99%

is a reliable supplier for high purity MAX Special Ceramics Material Titanium Silicon Carbide Ti3SiC2 Powder,99%.…

High Purity Niobium Carbide NbC Powder CAS 12069-94-2,99%

is a reliable supplier for high purity Niobium Carbide NbC Powder CAS 12069-94-2, 99%.…

High Purity Antimony Selenide Sb2Se3 Powder CAS 1315-05-5 99.9%

is a reliable supplier for high purity Antimony Selenide Sb2Se3 Powder CAS 1315-05-5 99.9%…

0086-0379-64280201 brad@ihpa.net skype whatsapp