High Purity Zinc Selenide ZnSe Powder CAS 1315-09-9, 99.9%

Zinc selenide is a chemical compound with the formula ZnSe. It's a yellow-colored solid compound that is used extensively in medicine, lasers, infrared and night vision. Size of the particle: Granule, -100mesh
Purity: 99.9%

Zinc Selenide ZnSe Powder
Zinc Selenide (Zinc Selenide), an organic compound, has the molecular structure ZnSe with a molecularweight of 144.35. It comes in a yellow cubic system of crystals. The relative density is 5.65. Sublimation. Transmittance is greater than 60% for infrared lights with wavelengths below 15 mm. You can see light rapidly turning red, often when the wavelength is less than 15 mm. Zinc selenide, while insoluble in water and reacts with acids to create toxic hydrogen selenide gaz.
Zinc selenide is composed of selenium(Se), and zinc (Zn). It's an intrinsic semiconductor, with a bandgap at 25degC (77.5degF) of approximately 2.70eV.
ZnSe can be described as a broadband semiconductor belonging to the IIVI semiconductor family. It is difficult but possible. P-type doping, however, is easier and can be done by adding gallium.
Zinc selenide is made of zinc and selenium II - VI compounds semiconductor materials. If heated to a temperature in the atmosphere, it will become carbon dioxide selenium or zinc oxide. However, the forbidden bandwidth is only 2.6 eV. The compound semiconductor is capable of emitting visible light from yellow materials to blue. If you are interested in Zinc Selenide ZnSe Powder, please send us an inquiry.

Zinc Selenide ZnSe Pulp - Properties
Zinc selenide, with the chemical formula ZnSe has a molecularweight of 144.33. This solid, light-colored compound is insoluble when dissolved in water. You can make it by reacting with zinc chloride or zinc sulfate. With hydrogen selenide. Useful in laser medicine, astronomy, night vision, and other fields. A yellow transparent, polycrystalline zinc selenide substance has a crystal size of 70 mm. It also has a light transmission range between 0.5-15 mm. The chemical vapor deposit (CVD) process has virtually zero impurity absorption and a very low scattering loss. This material is the best choice to make optical devices using high-power CO2 lasers because of its low absorption at 10.6mm wavelength. Additionally, this material is used frequently in other optical systems throughout its light transmission spectrum.
Specification ZnSe Zinc Selenide Powder :
Zinc Selenide, MF ZnSe
Zinc SelenideColor light yellow
Zinc Selenide Weight 144
Zinc SelenideMelting point 1100
Zinc SelenideCAS 1315-09-9
Zinc SelenideEINECS Nr. 215-259-7
Zinc Selenide density 5.42 g/cm3

It is simple. Zinc Selenide ZnSe Powder produced?
Zinc selenide may be made by heating ZnSO4 solution and H2Se, or ZnO and ZnS together and heating them to 800. This is used to catalyze the organic synthesis from isopropanol of acetone. A Phosphor is an organic compound which contains Cd but has a low amount of Zn.
1. A dilute solution of zinc sulfurate, buffered by ammoniumacetate, is added into the saturated H2Se solution. H2Se gas is then diluted or added to this solution. Heat the precipitated vessel in a steambath. After that, add H2Se gas diluted with N2 or H2 to the solution. Zinc salt solutions that are too concentrated or too quickly introduced will cause white precipitates. These precipitates will not change into yellow ZnSe and will need to be removed by centrifugation. After the separation, it was first washed in boiled ammonia then followed with methanol. After the ZnSe precipitates had been cleaned, they were dried first in a vacuum dryer with CaCl2. Next, it was dried at 120° C in a dryer with P2O5.
Zinc selenide reacts very strongly to moisture. The dried product should be placed inside a glass tube and heated to 600 °C in H2 or Se atmosphere for 2 to 4 hours to get rid of the oxidized material.
2. The mixture of four grams zinc oxide, two-thirds of a cup zinc sulfide, and six grams selenium were placed inside a quartz crucible with the lid. After heating at 800 for 15 mins to get the ZnSe product, the lid was removed.

Applicaciones Zinc Selenide ZnSe Powder
ZnSe is produced in melt with excess inert gases pressure (usually Ar). ZnSe is ideal for use in 10.6mm wavelength CO2 laser optics as it does not absorb or include any inclusions. ZnSe therefore is an infrared important material. It can transmit wavelengths of 0.45 21.5mm. Green had a refractive Index of 550nm, while LWIR's index was 2.40. ZnSe can also be used for:
1. ZnSe is a good choice for both fluorescent materials and semiconductor dopants.
2. ZnSe has a wide range of uses in medicine, laser, and infrared.
3. Znse is used in the manufacture of infrared transmissible materials and optical instruments
4. ZnSe is used for the formation of an IIVI LED and diode-laser. It emits blue light.
Infrared laser gain medium for Cr Doped ZnSe, (ZnSe : Cr), has an emission wavelength approximately 2.4 mm.
5. A scintillator with a wavelength of 640nm called Activated ZnSe is suitable to match the photodiode. It can be used in X-ray and gamma radiation detectors. ZnSe scintillator has a distinct design.

Shipping Zinc Selenide Zinse Powder - Packing and Shipping
Zinc Selenide ZnSe Powder packaging: Vacuum packing, 1kg/bag and 25kg/barrel or as required
Zinc Selenide ZnSe Powder shipping: The payment receipt will be used to send the order by mail, air or express.

Zinc Selenide ZnSe Powder Properties

Other Titles Zinc Selenide, IR grade zinc selenide, Zinc monoselenide,
Stilleite, selanylidenezinc, selenoxozinc, Zn-Se, Zn-SE-04-P, Zn3Se2
1315-09-9
Compound Formula ZnSe
Molecular Weight 144.35
Appearance Solid crystalline solid light yellow
Melting Point 1520-1525 degC
Solubility In Water 0.01g/100g Water
Density 5.27 g/cm3
Purity 99.90%
Particle Size granule, -100mesh
Boling Point N/A
Specific Heat 340 J/kg-K
Thermo Conductivity 18 W/m-K (@ 298K)
Thermal Expansion 7.3 um/m-K
Young's Module 67.2-69GPa
Exact 143.845668
Monoisotopic 143.845673 Da

Zinc Selenide ZnSe Pulp Health & Safety Info

Safety Notice Danger
Hazard Statements H301-H331-H373-H410
Flashing Point N/A
Hazard Codes T,N
Risk Codes 23/25-33-50/53
Safety statements 20/21-28-45-60-61
RTECS # N/A
Transport Information UN 3283 6.1/PG2
Germany 3

Inquiry us

PREVIOUS Selenide Powder

Our Latest Products

High Purity MAX Special Ceramics Material Titanium Silicon Carbide Ti3SiC2 Powder,99%

is a reliable supplier for high purity MAX Special Ceramics Material Titanium Silicon Carbide Ti3SiC2 Powder,99%.…

High Purity Niobium Carbide NbC Powder CAS 12069-94-2,99%

is a reliable supplier for high purity Niobium Carbide NbC Powder CAS 12069-94-2, 99%.…

High Purity Antimony Selenide Sb2Se3 Powder CAS 1315-05-5 99.9%

is a reliable supplier for high purity Antimony Selenide Sb2Se3 Powder CAS 1315-05-5 99.9%…

0086-0379-64280201 brad@ihpa.net skype whatsapp