High Purity Magnesium Silicide Mg2Si Powder CAS 22831-39-6, 99%

Magnesium Silicide is the most stable component in the MgSi binary. It is known for its high melting point and hardness as well as high elastic modulus. Purity: 99%
Particle Size: 5-10um

Magnesium Silicide Mg2Si Powder :
Magnesium Silicide is an organic compound that is made up of magnesium and silica. The chemical formula for this inorganic compound is Mg2Si with a molecular weight of 76.71. Cubic crystal in cyan, or light purple. The melting point at 1102°C is the relative density at 1.94.
Magnesium silicide does not dissolve in cold water but will decompose in hot. The silica can be totally decomposed by heating it up to 1200°C under hydrogen flow. For the alkali solution, it is stable. Hydrogen and silane can be produced by their decomposition. Mg2Si, the stable compound in the MG-Si binary, has a high melt point, high hardness. High-elastic modus properties make it a narrow-bandgap n-type semiconductor materials. These are used to manufacture optoelectronic devices and energy devices. Mg2Si has an entire structure that belongs to the facial cube lattice. Its space group is FM3M and its group number is 225. The lattice constant A = 0.6391nm. The crystal structure shows that each Si atom is in (0, 0, 0, 0), which forms a facial cubic structure of a long A. The MG atom, located in the (0.25, 0.25, 0.25) location, is found at the center Si atom-filled tetrahedron. It forms an unfilial, unfilial structure at A / 2. Magnesium Silicide is a narrow-gap semiconductor. While the conductivity of crystal growth is n-type, it can also be doped with Ag or Ga, Sn or Li (in high dose). Send an inquiry for the most current price to purchase Magnesium Silicide Sg2Si Powder bulk.

Magnesium Silicide, Mg2Si powder:
Magnesium silicide (CAS 22833-39-6) powder has a high melting temperature, high corrosion resistance.

Technical Parameter Magnesium Silicide Mg2Si powder:
Name of the product MF Purity Particle Size Melting Point Density The color of the sky
Silicide magnesium Mg2Si 99% 5-10um 1102 1.94 g/cm3 black

Chemical composition of Magnesium Silicide Powder Mg2Si:
Mg2Si Mg Si C P Fe S
>99% Balance 36% 0.09% 0.02% 0.25% 0.005%

It is simple. Silicide for Magnesium Mg2Si Powder produced?
Silica powder has a particle size of 180. Magnesium powder is 100g. Research has revealed that silicide magnesium reacts at 600°C for 4 hours, with a cooling rate of 10°C/min, product quality and more than 98%.

Magnesium Silicide Mg2Si Powder :
Magnesium Silicide is used often to create aluminum alloys. This contains around 1.5% magnesium sulicide.
To produce a series of aluminum alloys, 6000 series with up to 1.5% magnesium silicide, Magnesium Silicide can be used. It is possible to harden the alloy of this group and create the Guinier PRESTON zone or a very fine precipitate. This will increase the strength of your alloy.
The principal electronic use of MG2Si's MG2Si can be found in its thermoelectric generator.
Magnesium silicides can be used primarily to make other silicides.
It is used for the production of MgSin2 powder. It is useful in the production of non-oxide clay powder.
An by-product of silicide magnesium silicide

Shipping Magnesium Silicide Mg2Si powder:
There are several types of packing available depending on the amount Mg2Si magnesium silicide.
Packing of Magnesium silicide, Mg2Si powder: You can vacuum pack 1 kg/bag, 25kg/barrel or according to your requirements.
Delivery of magnesium silicide Mg2Si in powder form: May be sent out by sea, air or express once payment has been received.

Magnesium Silicide Properties

Other Titles dimagnesium silicide, dimagnesium monisilicide,
MgSi, Mg2Si powder
Compound Formula Mg2Si
Molecular Weight 76.7
Appearance Gray Black Powder
Melting Point N/A
Boiling Point N/A
Density 1.94 g/cm3
Solubility of H2O N/A
Exact 75.94701

Magnesium Siicide Health and Safety Information

Signal word Danger
Hazard Statements H261
Hazard Codes F
Risk Codes 14/15
Safety statements N/A
Transport Information UN 2624 4.3/PG2

Inquiry us

Our Latest Products

High Purity MAX Special Ceramics Material Titanium Silicon Carbide Ti3SiC2 Powder,99%

is a reliable supplier for high purity MAX Special Ceramics Material Titanium Silicon Carbide Ti3SiC2 Powder,99%.…

High Purity Niobium Carbide NbC Powder CAS 12069-94-2,99%

is a reliable supplier for high purity Niobium Carbide NbC Powder CAS 12069-94-2, 99%.…

High Purity Antimony Selenide Sb2Se3 Powder CAS 1315-05-5 99.9%

is a reliable supplier for high purity Antimony Selenide Sb2Se3 Powder CAS 1315-05-5 99.9%…

0086-0379-64280201 brad@ihpa.net skype whatsapp