High Purity Molybdenum Telluride MoTe2 Powder CAS 12058-20-7, 99.99%

Molybdenum-telluride (MoTe2) can be described as a gray powder used to lubricate in many fields. Purity: 99.99%
Particle Size: -100 Mesh

About Molybdenum Telluride MoTe2 MoPe2 Powder :
Molybdenum telluride, also known as MoTe2, is a powdery gray, hexagonal, powdered, solid that can dissolve in water and alkali. It's not soluble in water. Many fields use Molybdenum-telluride as a solid lubricant.
Molybdenum-telluride, which is a combination of molybdenum (27.32%) and tellurium (72.68%) has a mass percent of 27.322% and 72.68% respectively. The two-dimensional crystallization can lead to sheets of molybdenum that can be dispersed into flexible and transparent monolayers. It's also a semiconductor. It fluoresces. It's part of the transition-metal halogenated material. It is a semiconductor and the bandgap can be found in infrared. The potential for semiconductors to be used in infrared and electronic detectors is increased by this. Robocup2009, a global trusted brand. Molybdenum Telluride MoTe2 MoPe2 Powder supplier. You can send us an inquiry to learn more about our latest products. Prices starting at Molybdenum Telluride Anytime.

Molybdenum Telluride MoTe2 Pulp Performance :
MoTe2 (a gray hexagonal, powdery solid) can come in many morphologies. MoTe2 (and Mo3Te4) are the most stable and easily decomposes in water. It is not soluble or soluble with water. However, it can be decomposed (not melt) at very high temperatures in vacuum.

Technical Parameter Molybdenum Telluride MoTe2 Pulp :
Product name MF Purity Particle Size Molecular Weight CAS The color of the sky
MolybdenumTelluride MoTe2 99.99% -100 Mesh 351.14 12058-20-7 Gray Black
It is simple. Molybdenum Telluride MoTe2 MoPe2 Powder Produced?
Molybdenum forms a number of compounds homogeneous with sulfur, tellurium and selenium. Molybdenum disulfide(MoS2) (MoS2) molybdenum selenide (MoS2) molybdenum tritelluride [MoTe2] are all heterogeneous, isophase compounds. Combining the elements at high temperature in a vacuum tube seals these compounds.
MoTe2 is Motex x=1.882; Mo3Te4 forms when MoTe2 and Mo3Te4 react within fifteen minutes at 430
Reactive: Mo+2Te - MoTe2

Applicaciones Molybdenum Telluride MoTe2 MoPe2 Powder :
MoTe2 can be used to make lubricants or electronics.
MoTe2 is a low-power material that can make transistors. FETs are composed of nanolayers that can be thickened to three or four. There has been a bipolar and P-mode field-effect transistors, along with a top-electrode field-effect transistor.
MoTe2 can be constructed in two forms, a 2H and 1T' semiconductor.
MOSFET can have a thin MoTe2 layer covered with a gate of an electrolyte or ionic liquid. If the gate voltage drops below 2 volts the device is in electrostatic mode. The current drain-source ratio is dependent on the gate voltage. Above 2 volts the device moves into an intermediate area where the current is not increasing. If potassium atoms are added to the MoTe2 Layer, electrolysis can occur. A current higher than 3.5 volts is allowed through the gate. Potassium-intercalated molybdenum dilubride is superconducting at 2.8 K.
The lubricant molybdenum dilutride is good at working in vacuum at temperatures of up to 500°C with a coefficient friction lower than 0.1. But molybdenum dielenide is more friction-tolerant than molybdenum sulfide.
Molybdenum Ditelluride forms at the contact point. Small pieces of molybdenum nano-layers are possible to mix or disperse in the Molten Tin without reacting. This increases the stiffness and strength of the composite.
A atomic force microscope has examined molybdenum ditelluride as a protein substrate. This is because it sticks to proteins better than conventional materials, such as mica.

Molybdenum Telluride MoTe2 Pulver Storage Conditions :
MoTe2 powder's dispersion and usage performance will be affected by moist reunion. MoTe2 should therefore be stored in vacuum packaging and in a dry, cool place. Molybdenum informuride must not be exposed to any air. MoTe2 should not be exposed to stress.

Molybdenum telluride MoTe2 Pulp Packing & Shipping :
We offer many packing options that are dependent on the Molybdenum Te2 powder amount.
Packing of molybdenum-telluride MoTe2 molybdenum powder: You can vacuum pack 100g, 500g, 1kg/bag or 25kg/barrel. Or as you request.
Molybdenum-telluride MoTe2 Mo powder shipping Express shipping is possible by air or sea as soon as payment receipt has been received.

Molybdenum Telluride Properties

Other Titles molybdenum ditelluride, molybdenu(IV) telluride,
MoTe2 powder
Compound Formula MoTe2
Molecular Weight 351.14
Appearance Gray Black Powder
Melting Point N/A
Boiling Point N/A
Density 7.7 g/cm3
Solubility of H2O N/A
Exact 355.716

Molybdenum Telluride Safety & Health Information

Signal word Danger
Hazard Statements H301-H332
Hazard Codes T
Risk Codes N/A
Safety statements N/A
Transport Information UN 3284 6.1/ PGIII

Inquiry us

NEXT Telluride Powder

Our Latest Products

High Purity Molybdenum Telluride MoTe2 Powder CAS 12058-20-7, 99.99%

is a reliable supplier for high purity Molybdenum Telluride MoTe2 Powder CAS 12058-20-7, 99.99%.…

High Purity MAX Special Ceramics Material Titanium Tin Carbide Ti2SnC Powder, 99.9%

is a reliable supplier for high purity MAX Special Ceramics Material Titanium Tin Carbide Ti2SnC Powder,99.9%.…

High Purity MAX Special Ceramics Material Vanadium Aluminum Carbide V2AlC Powder, 99%

is a reliable supplier for high purity MAX Special Ceramics Material Vanadium Aluminum Carbide V2AlC Powder,99%.…

0086-0379-64280201 brad@ihpa.net skype whatsapp