SLS Nylon Powder PrintingNylon sintering (selective laser sintering) is a project that uses spread powder sticks to tile a thick layer of powders, such as metal powders, on parts. It is heated below the powder melting temperature instead of at a specified temperature.
Material: nylons, fibers and nylons

SLM Metal 3D Printing
Metal sintering can be described as a selective laser sintering. It is the process of using a powder stick to spread a layer on a molded part, heating it and keeping the temperature well below the sintering temperature for metal powder.
Materials: aluminum alloy, stainless steel die steel, titanium alloy, etc

SLA laser photocuring flow
Under the control of the computer, scan along the liquid surface according to the requirements of the section contour. Under the control of a computer, focus the laser beam on the liquid surface and scan it according to the section contour. This will cure the resin along the scanned area, resulting in a resin sheet with the section contour. The table is then lowered a thin layer to cover the cured resin with another liquid resin to perform a second scanning laser cure. The newly-cured layer is then adhered to the previous one and so forth until the whole product is formed.
( Tech Co., Ltd. ) is an experienced 3D metal powders producer with more than 12 years in the chemical product development and research field. Contact us to send an inquiry if you are interested in high-quality 3D printed metal powders.

Inquiry us