High Purity Aluminum Silicide AlSi2 Powder, 99%

Aluminum Silicide AlSi2 Pulver:
Alloys of aluminum and silicon Aluminium-silicon alloy is an alloy made by forging or casting aluminum with silicon as its major components. The average silicon content is 11 percent. A small amount of copper or iron is also added for strength. The density of the material is approximately 2.62.7. It is around 2.62.7 g/cm3. The thermal conductivity of the material is 101126W/(m*), Young’s modulus 71.0GPa. Impact value 78.5J. Fatigue limit +-45MPa.
Because of its light weight, high thermal conductivity, certain strength and hardness as well as corrosion resistance AI-Si Alloys These are commonly used in automotive manufacturing and machine building to create parts that can be used under sliding friction conditions.

The aluminum-silicon alloy It forms a binary phase in 11.7% silicon, with a melting point at 577degC. Both phases can be described as silicon solid solutions of aluminum and silicon solid solutions of aluminum at room temperature. There is no intermetallic compound. You can add sodium in very small amounts to increase the eutectic strength and harden the dispersion. Although iron is not a very good choice, it can significantly reduce toughness. However, manganese may be used to mitigate this.

Al-Si alloy This is an industrial metal that's very valuable. Aluminium silicide This metal is extensively used in the construction of automobiles, aircraft, transport, and other major industries. This is used for making low and medium-strength castings of complex shapes like brackets and motor housings. Brazing solder is also made from racks. It is a typical eutectic alloy with a simplified phase diagram. No intermediate compounds are made. This alloy offers high casting performance, low cost and good specific strength. It is an element in the third group of elements, with silicon being a semiconductor element. The difference between them is small.

To receive the latest information, send us an inquiry aluminum disilicide price You can buy here Aluminum silicicide AlSi2 Powder In bulk.

The Product Performance of AlSi2 Aluminum Silicide Powder
Aluminum silicide AlSi2 (powder) is an alloy from silicon and aluminium. The aluminum silicide, which is often in the form of powder, is used as a material raw material for powder metalurgisty. Aluminum silicide is formed at high temperatures into a liquid and then pressed into different products.

Technical Parameters of AlSi2 Powder Aluminum Silicide:

Product name	MF	Purity	Particle size	Melting Point	Density	The color of the sky
Silicide of aluminum	AlSi2	99%	5-10um	1400	2.7g/cm3	gray-black

Chemical composition of AlSi2 Powder Aluminum Silicide:

AlSi2	Al	Si	Fe	Ca	S	P	C
99%	70%	Balance	0.2%	0.1%	0.02%	0.05%	0.02%

It is simple. Aluminum silicicide AlSi2 powder produced?
An electrothermal process for making aluminum-silicon alloy is at around 2000 degC. Alumina and silicon oxide, which are liquids during the metallurgical processes, are reduced by a carbonaceous agent. The maximum temperature the submerged arcane can achieve is usually about 1350 2200 degC.

Applicaciones Aluminum Silicide AlSi2 (Powder)
The ductility of an aluminum-silicon alloy is best when it has a low silicon content (e.g. 0.7). It is also more malleable and can often be used as deformed alloy. But, the silicone content of aluminum-silicon is greater (e.g. 7%), and the casting of the melt aluminum-silicon alloy alloy melt is easier. This is why it is most commonly used in the making of Cast alloy.

When the Al-Si alloy has a silicon content greater than 12.6%, or the silicon particle count is higher than 14.5% to 25% (silicon content between 12.6% and 25%), adding some Ni, Cu, Mg, or other elements can enhance its complete mechanical properties.

These can be replaced by cast iron cylinders for a significant weight reduction. You can electrochemically treat the aluminum-silicon cylinder to remove the surface aluminum, retain primary silicon dots embedded within the substrate of the cylinder and improve its wear and scratch resistance.

Due to its low weight and corrosion resistance, an alloy with between 11%-13% silicon content is one of the top piston materials.
1). Powder metallurgical aluminum silicide AlSi2 can be used to make powder. It is possible for high temperature aluminum silicide to melt at high temperatures and was then pressed into many different products.
2). AlSi2 aluminum silicide powder is used for the production of complex castings like bracket, cover, and motor shell.
3). As brazing solder, AlSi2 silicide AlSi2 is used.

Shipping Aluminum Silicide AlSi2 Pulver:
We offer many packing options that are dependent on the amount of aluminum silicide, AlSi2 Powder.
Powder packaging of aluminum silicide, AlSi2 You can vacuum pack 1kg/bag, 25kg/barrel or according to your requirements.
Aluminium silicide AlSi2 Powder shipping Could be sent by air, sea or express once payment has been received.


Eduloc advanced materials Nano Technology Co. Ltd. (Eduloc), is an established global supplier of chemicals and manufacturers with more than 12 years experience. They offer super high quality chemical products, Nanomaterials, as well as graphite powder, boride powders, sulfide powders, 3D printing, and nitride.
High-quality products are what you want Al Si2 Pulver Please feel free and contact us to make an enquiry. ( brad@ihpa.net )