High Quality EBS Ethylene Bis Stearamide Emulsion

EBS Ethylene Bis Stearamide Emulsion, a white emulsion. It is safe for the environment, is not toxic, isn't polluting and is non-hazardous. This product can be used to make inks, paints, and leather coatings. Particle Size: D50: =2mm

Product name: Ethylene bis stearamide emulsion

Formula: C38H76N2O2

Products property This product was produced using modern technology. The appearance of the product is white emulsion. This product is not toxic, polluting, hazardous, or harmful to the environment. The product is very easy to dissolve in water. It has a low viscosity and good compatibility.

EBS Ethylene bis Stearamide Emulsion :
EBS Ethylene Bis Steramide is a cream-colored lotion. Ebs Ethylene Bis Steramide, a high-melting point white wax with a very hard melting point, is nontoxic. The industrial products have small yellow particles. They are stable in water and acid-base solvents. This powder contains soluble hydrocarbons as well as aromatic hydrocarbon solvents. The compound has wettability in water of 80°C or more.
EBS stands for Ethylene-bis Steramide. This synthetic wax has a high melting point and is highly compatible with most thermoset thermoplastics. The best pigment dispersants for the finished product are the outer and lubricants.
Ebs Ethylene Bis Steramide - A new type of plastic lubricant which can be used for PVC, ABS and high-resistant polystyrene products. This is in addition to other traditional lubricants, such as paraffin. The stearate has a better internal lubrication and external lubrication that lubricants, like polyethylene wax. Plastic molding is improved by the fluidity of the fused plastic. The result is a higher yield in plastic processing, reduced energy consumption, and a product with incredibly smooth surfaces. Send an inquiry for the most current price to purchase bulk EBS Ethylene Bis Stearamide Emulsion.

Ethylene Bis stearamide emulsion properties:
EBS Ethylene Bis Stearamide Emulsion, a white emulsion. It is safe, effective, environmentally-friendly, and non-polluting. It can be easily dispersed in water.

It is simple. EBS Ethylene Bis Stearamide produced?
You can divide EBS's synthesis technique into 4 routes.
Combining amines and stearic acids to make stearic acid
Reacting with an amine compound to the stearate react is called "stearate"
The hardy amine and chloride compounds are not recommended.
Hydrolysis of the nitrile.
First and second are most common. The first is the most common. It is straightforward, requires no reaction conditions, has three disruptions but is low in purity. Although the EBS is large, the energy consumed is substantial, the process can take a while and is lengthy.

Use of EBS Ethylene Bis Stearamide Emulsion :
EBS Ethylene Bis Stearamide Emulsion, a white emulsion. It is safe, effective, environmentally friendly, and non-polluting. It can be easily dispersed in water.
1.Plastic
There are many types of thermoplastic and thermoset polymers that can be used as sliding agents. These include ABS, PS and AS. They also come in PP, PVAC and Cellulose. Accurate, Nylon, and PP. Amino plastic, Phenolic resin, and others have excellent finishes.
An auxiliary agent can also be used as an internal release agent in thermoplastic PUR molding. The amount of the agent is between 0.1 and 1%.
Polymethylene gulf agents add 0.5% of additional, increasing melt flow rates and whiteness. The thermal stability, physical indicators and physical indicators for polyoxymethylene also increase.
2. Rubber
EBS, synthetic rubbers and polychloroprene (SBR), add 1 to 3 percent EBS to their emulsion. They have excellent anti-sticking and antiblocking abilities. EBS is also applied to automotive flooring mats, drain pipes, and other rubber products. This gives them a higher surface gloss.
3. Chemical fiber
EBS increases the heat resistance, fluidity, and antistatic properties of polyamide, polyester, and other fibers.
4. Type
Casting sand can be added to a phenol-based resin in order to include EBS as an example agent.
5. Pigment, filler dispersant
EBS can be used as a plastic. Chemical fiber parent: ABS, PS. Polypropylene. Polyester pellets.
EBS can be used to color plastics with a spread of powdered EBS.
The pigment filler amount determines how much is added.
6. Powder coating
EBS can also be used to aid in the preparation of powder coatings.
7. Coatings, inks
To improve the performance of paints and paints, you can add 0.5% - 2% EBS.
You can use it in furniture polishing agents or printing inks.
8. Uses other than those listed
The melting point of petroleum products
Lubricants and corrosion inhibitors during the metal wire. Potting materials for electric components.
Below the papermaking agent, and above the paper coating components
You can dye textiles with a dyeing engineer defoamer or a permanent water-drawing agent.
You can add this product to asphalt. This will lower the asphalt's viscosity and improve its weather resistance.

Technical Information of Ethylene bis Stearamide Emulsion

Product EB-20
Solid content. % 20+-2
Cps, viscosity <=100
Particle Size D50 <=2um
PH 7-9

Shipping and Packing of Ethylene bis stearamide emulsion
The Ethylene Bis Stearamide Emulsion amount will determine the type of packing we offer.
Ethylene Bis Stearamide Emulsion packing: 25kg/barrel
Ethylene Bis Stearamide Emulsion shipping: Could be sent by sea or air as soon as payment receipt has been received.

EBS Ethylene Bis Stearamide Emulsion Properties

Other Titles 1,2-Bis(stearoylamino) ethane N,N'-1,2, Ethanediylbisoctadecanamide,
N,N'-Ethylenedi(stearamide), Ethylene distearylamide
N/A
Compound Formula C38H76N2O2
Molecular Weight 593.038 g*mol-1
Appearance Crystals of white, waxy color
Melting Point 144 to 146°C
Solubility In Water N/A
Density N/A
Purity N/A
Particle Size D50: <=2mm
Boling Point N/A
Specific Heat N/A
Thermo Conductivity N/A
Thermal Expansion N/A
Young's Module N/A
Exact Maximum N/A
Monoisotopic N/A

EBS Ethylene Bis Stearamide Emulsion Safety & Health Information

Safety Notice Alert
Hazard Statements H315, H319, H335
Flashing Point 280 degC
Hazard Codes T
Risk Codes N/A
Safety statements N/A
RTECS # N/A
Transport Information N/A
WWK Germany N/A

Inquiry us

NEXT Stearic Acid Series

Our Latest Products

High Purity Copper Oxide CuO powder CAS 1317-38-0, 99.9%

CuO is the chemical name for copper oxide. Copper oxide is a black copper oxide with a slightly amphoteric, and slight hygroscopic chemical formula. Its relative molecular mass of 79.545 is 66.36.9g/cm3. It has a melting point of 1026 and a low melti…

High Quality Water-Based Boron Nitride Emulsion

A water-based, organic high-temperature oil lubricating substance is the Water-Based Boron Nitride Emulsion. It doesn't bond with or infiltrate molten metallic liquids and it can protect surfaces of ceramic utensils or other refractory material. Ab…

High Purity Calcium Silicide CaSi2 Powder CAS 12013-56-8, 99%

Calcium silicide (also known as calcium diilicide) is a chemical formula that is CaSi2. CaSi2 calcium silicide powder is used to make steelmaking steelmaking, and other special steel additives. Purity: 99%Particle size 5-10um Calcium Silicide CaSi2…

0086-0379-64280201 brad@ihpa.net skype whatsapp