High Purity 3D Printing Ti6Al4V Powder TC4 Powder

Ti6Al4V is also called TC4 and it's an a-b titan alloy that has a very high strength-toweight ratio. It also has excellent corrosion resistance. It is one of most common titanium alloys.

About the 3D Printing of Ti6Al4V (TC4) Powder: TC4 is a titanium alloy that has excellent corrosion resistance and a low density. It is a common titanium alloy that is widely used to make low-density parts and components for the aerospace industry. Also, it has excellent corrosion resistance which is needed in biomechanical applications such as implants and prostheses. The a+b alloy can be heat-treated to increase its strength. Titanium 6 aluminum vanadium 4 is best used at temperatures below 350/660.
TC4 titanium alloy exhibits excellent corrosion resistance. It has many advantages, including low density and high specific strength. It has been used by the aerospace, petrochemicals shipbuilding, auto, pharmaceutical and many other industries.
Due to these attractive properties, the (CpTi), A # B, and new metastable B titanium alloys have been developed. These properties were the reason for the introduction of A # B and (CpTi). They also influenced the later development of orthostable B titanium alloys. Titanium alloys are limited in their biomedical uses due to their poor shear resistance and wear resistance. B-Ti alloys have shown a slight improvement in their wear resistance when compared with A # B, but a deeper understanding of the wear mechanism is needed to use orthopedic titanium alloys for wear components. If you are interested in purchasing 3D printing Ti6Al4V powder TC4 powder in bulk, please send us an inquiry for the most current price.

Main elements:


You can also find out more about V

It is a good idea to use a different language.




Impurity element:



You can also find out more about the Nächstendenumireaajungi?back orbzw backdersprach oder


The following are some of the reasons why you should consider hiring someone else









Alloy grades & Characteristics

Alloy number

TA0,TA1,TC4,TC4 ELI,TC11,TC17,TC18,TC21,TA7,TA12,TA15,TA17,TA19,

Particle Size

0-20mm, 15-45mm, 15-53mm, 53-105mm, 53-150mm, 105-250mm


Spherical or near spherical




Aluminum bag,Vacuum packing


3D printing of metal powder

Other applications

powder metallurgy(PM), injection molding(MIM), spray painting(SP) etc.

What is 3D Printing Powder Ti6Al4V TC4 Powder produced?
The alloy was heated to change its phase and Ti6Al4V content. The exact heat treatment method and the processing method will have a large impact on microstructure. Three heat treatment processes include mill annealing (also known as two-phase annealing), solution treatment, and aging treatment.

Applications 3D printing Ti6Al4V powder TC4 Powder :
Ti6Al4V is used extensively in the aviation industry because it has good properties such as hardness, weight, formability and resistance to corrosion.
Ti6Al4V has excellent corrosion resistance and can be used at low temperatures. For example, aircraft steam-turbine engine parts, aircraft structural elements, aviation fasteners or high-performance automated parts.
Additive manufacturing for implant and prosthesis (cast, forged or made using solid free-forming SFF).
The racing and aerospace industries need parts and prototypes.
Boeing 787 uses it extensively.
Marine applications
The chemical industry.
Gas turbines.
Silencers for guns are available.

Storage condition of Ti6Al4V TC4 powder:
The TC4 cannot be exposed to air. It should be stored in a dry and cool room. Ti6Al4V Powder should not be exposed to stress.

Shipping & Packing of Ti6Al4V TC4 powder:
The packaging we use depends on the amount of Ti6Al4V.
Packaging of TC4 Powder: Vacuum packaging, 100g/bag, 500g/bag, 1kg/bag and 25kg/barrel.
Shipping of TC4 powder: can be done by air, sea or express.

Ti6Al4V TC4 Powder Properties

Alternative Names Ti6Al4V, TC4 Powder
CAS Number N/A
Compound Formula TA0,TA1,TC4,TC4 ELI,TC11,TC17,TC18,TC21,TA7,TA12,TA15,TA17,TA19,
Molecular Mass N/A
Appearance Grey powder
Melting Point N/A
Solubility N/A
Density N/A
Purity 99%
Particle Size 0-20mm, 15-45mm, 15-53mm, 53-105mm, 53-150mm, 105-250mm
Bolding Point N/A
Specific Heating N/A
Thermal Conduction N/A
Thermal Expander N/A
Young Modulus N/A
Exact Mass N/A
Monoisotopic Mash N/A

Ti6Al4V TC4 Powder Health & Safety information

Safety Advisory N/A
Hazard Statements N/A
Flashing point N/A
Hazard Codes N/A
Risk Codes N/A
Safety Declarations N/A
RTECS Number N/A
Transport Information N/A
WGK Germany N/A

Inquiry us

NEXT 3D Printing Powder

Our Latest Products

High Purity Calcium Hexaboride CaB6 Powder CAS 12007-99-7, 99%

TRUNNANO is a reliable supplier for high purity Calcium Hexaboride CaB6 Powder CAS 12007-99-7, 99%.…

High Purity Molybdenum Powder Mo Powder CAS 7439-98-7, 99.9%

TRUNNANO is a reliable supplier for high purity Molybdenum Powder Mo Powder CAS 7439-98-7, 99.9%.…

High Purity Aluminum Nitride AlN Powder CAS 24304-00-5, 99.5%

TRUNNANO is a reliable supplier for high purity aluminum nitride AlN Powder CAS 24304-00-5, 99.5%.…

0086-0379-64280201 brad@ihpa.net skype whatsapp