Overview of Nonionic Surfactant

Nonionic surfactants are surface-active agents that do not ionize in aqueous solutions. They are widely used in various industries, including detergents, cosmetics, and pharmaceuticals, due to their excellent solubilizing, emulsifying, and wetting properties. These surfactants are derived from alcohols, acids, or amines and are known for their versatility and compatibility with other surfactants.

Features of Nonionic Surfactant

Non-Ionic Nature: Do not form ions in water, making them less sensitive to hard water and electrolytes.

Versatility: Compatible with both anionic and cationic surfactants, allowing for broad formulation flexibility.

Solubilization: Excellent at solubilizing oils and other hydrophobic substances.

Emulsification: Effective in creating stable emulsions, which is crucial for many cosmetic and pharmaceutical formulations.

Wetting Ability: Enhances the wetting of surfaces, improving cleaning efficiency.

Low Foaming: Generally produce less foam compared to other types of surfactants, which can be advantageous in certain applications like industrial cleaning.

Temperature Stability: Maintain effectiveness over a wide range of temperatures, making them suitable for high-temperature processes.

Environmental Friendliness: Some nonionic surfactants are biodegradable, contributing to more environmentally friendly products.

(Nonionic Polymer Emulsion PHPA PAM Polyacrylamide Anionic Granule Powder for Flocculant Wastewater)

Specifications of Nonionic Polymer Emulsion PHPA PAM Polyacrylamide Anionic Granule Powder for Flocculant Wastewater

Here is the product content for the Nonionic Polymer Emulsion PHPA PAM Polyacrylamide Anionic Granule Powder for Flocculant Wastewater.

This product is a high-quality flocculant. It helps treat wastewater. It comes in two main forms. You can get it as a Nonionic Polymer Emulsion. You can also get it as Anionic Granule Powder. Both types work well for cleaning dirty water. The emulsion is a liquid. The powder is dry. Choose the form that fits your process best. The main job is flocculation. Flocculation means making small particles stick together. These particles form bigger clumps. The bigger clumps are called flocs. Flocs are heavy. They sink faster. This helps separate solids from water. The result is cleaner water. It also makes sludge thicker. Thicker sludge is easier to handle. The product works in many water conditions. It is not sensitive to pH changes. This is important. Wastewater pH can vary a lot. You don’t need to adjust pH constantly. The product dissolves easily in water. You get a good solution quickly. This saves time during preparation. It is effective for many types of wastewater. Industrial wastewater often contains many pollutants. Municipal sewage needs treatment too. The product helps in both cases. It promotes efficient solid-liquid separation. This improves water clarity. It also reduces the amount of sludge produced. Using less sludge lowers disposal costs. The anionic granule powder has a strong charge. This charge attracts particles in the water. It binds them effectively. The nonionic emulsion is also very efficient. It works without relying on charge. Both options deliver reliable performance. They are cost-effective solutions.

(Nonionic Polymer Emulsion PHPA PAM Polyacrylamide Anionic Granule Powder for Flocculant Wastewater)

Applications of Nonionic Polymer Emulsion PHPA PAM Polyacrylamide Anionic Granule Powder for Flocculant Wastewater

This stuff is PHPA PAM, polyacrylamide powder. It’s a nonionic polymer emulsion. People use it a lot for cleaning dirty water. It works as a flocculant. That means it makes tiny particles clump together. Those particles are in wastewater. They float around separately. The polymer helps them stick. It makes bigger clumps. These clumps are called flocs. Bigger flocs are easier to remove. You can take them out by letting them settle. Or you can filter them. Or you can skim them off the top. Using this polymer speeds up the cleaning process. It makes the water clearer. It works well with many different types of dirt in water. This includes dirt like clay, silt, and organic stuff. It also works with some industrial waste. It helps in many places. Factories use it. Sewage treatment plants use it. Mines use it. Even places making paper or oil use it. It’s good because it doesn’t carry a charge. It is nonionic. So it works even if the water’s chemistry changes. The water might have different salt levels. Or the pH might go up or down. This polymer still works fine. It is often better than charged polymers. Those charged types might not work if the water changes. You can use this powder alone. Or you can mix it with other chemicals. This makes it even stronger. It helps remove more dirt. It reduces the sludge volume too. Less sludge is cheaper to handle. The powder dissolves easily in water. You need to make a solution first. Then you add it to the dirty water. Mixing it well is important. It needs to spread through all the water. Then the clumping starts. The flocs form quickly. This polymer is efficient. You don’t need huge amounts. A little bit does a lot of work. It saves money. It cleans the water effectively.

Company Introduction

Welcome to Robocup, a premier global supplier of high-quality surfactants. Our extensive range includes anionic, cationic, nonionic, and amphoteric surfactants, catering to industries such as personal care, textiles, cleaning, and industrial applications. With advanced manufacturing facilities and rigorous quality control, we ensure that our products meet the highest international standards. We pride ourselves on our commitment to innovation, sustainability, and customer satisfaction. Our dedicated team provides tailored solutions to meet your specific needs. Partner with us for reliable, high-performance surfactants that drive your business forward. Explore our offerings and discover the difference today.

If you have any questions, please feel free to contact us(nanotrun@yahoo.com).

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of Nonionic Polymer Emulsion PHPA PAM Polyacrylamide Anionic Granule Powder for Flocculant Wastewater

Here are common questions about our Nonionic Polymer Emulsion PHPA PAM Polyacrylamide Anionic Granule Powder for wastewater treatment.

What is this product exactly? This product is a water-soluble polymer powder. It comes in granule form. People use it mainly as a flocculant. It helps clean wastewater. It makes small particles clump together. This makes them easier to remove.

How does it work in wastewater? The polymer molecules attach to particles in the dirty water. This includes mud, silt, organic matter. The polymer chains bridge between these particles. They form larger clumps called flocs. These flocs are heavy. They sink to the bottom fast. Then you can separate the clean water.

How much should I use? The right amount depends on your specific water. Test the water quality first. Check the level of suspended solids. Check the water chemistry. Start with a small dose. Usually, 0.1 to 10 parts per million works. Add it slowly. Mix it well. Too much can cause problems. Too little won’t work well.

Is it safe to handle? Yes, but take care. Wear gloves and goggles. Avoid breathing in the dust. Keep it dry. Store it in a cool place. Keep it away from children. It is generally safe for use. Follow standard safety rules.

Will it work well for my wastewater? It is very effective for many types. It works well on mineral suspensions. It works well on organic sludges. The exact results depend on your water. The pH level matters. The temperature matters. The salt content matters. We recommend testing a sample first. This shows you the best dose. This shows you the expected results.

(Nonionic Polymer Emulsion PHPA PAM Polyacrylamide Anionic Granule Powder for Flocculant Wastewater)