Overview of Nonionic Surfactant

Nonionic surfactants are surface-active agents that do not ionize in aqueous solutions. They are widely used in various industries, including detergents, cosmetics, and pharmaceuticals, due to their excellent solubilizing, emulsifying, and wetting properties. These surfactants are derived from alcohols, acids, or amines and are known for their versatility and compatibility with other surfactants.

Features of Nonionic Surfactant

Non-Ionic Nature: Do not form ions in water, making them less sensitive to hard water and electrolytes.

Versatility: Compatible with both anionic and cationic surfactants, allowing for broad formulation flexibility.

Solubilization: Excellent at solubilizing oils and other hydrophobic substances.

Emulsification: Effective in creating stable emulsions, which is crucial for many cosmetic and pharmaceutical formulations.

Wetting Ability: Enhances the wetting of surfaces, improving cleaning efficiency.

Low Foaming: Generally produce less foam compared to other types of surfactants, which can be advantageous in certain applications like industrial cleaning.

Temperature Stability: Maintain effectiveness over a wide range of temperatures, making them suitable for high-temperature processes.

Environmental Friendliness: Some nonionic surfactants are biodegradable, contributing to more environmentally friendly products.

(Factory White Powder Cationic Anionic Nonionic Polymer Flocculant Polyacrylamide)

Specifications of Factory White Powder Cationic Anionic Nonionic Polymer Flocculant Polyacrylamide

This product is a white powder polymer flocculant called Polyacrylamide, or PAM for short. Factories use it widely. It helps separate solids from liquids in water treatment. This makes water cleaner. PAM works by making tiny particles stick together. They form bigger clumps. These clumps sink or float. That makes them easy to remove.

We offer three main types: cationic, anionic, and nonionic. Each type works differently. Cationic PAM carries a positive charge. It works best with negatively charged particles. These are common in sewage sludge and organic waste. Anionic PAM carries a negative charge. It works best with positively charged particles. This includes clay and metal hydroxides. Nonionic PAM has no charge. It works well when particle charge is weak or neutral. It is good for mineral processing.

The powder dissolves in water. You need to make a solution first. Dissolving it properly is important. Use clean water. Stir it slowly at first. Then you can add it to the dirty water. The right dosage depends on your water. You might need to test to find the best amount. Too much can cause problems. Too little won’t work well.

Store the powder in a cool, dry place. Keep it away from moisture. Keep it away from heat and direct sunlight. The bags are sealed. Keep them sealed when not in use. This powder lasts a long time if stored correctly. Handle it carefully. Avoid breathing in the dust. Wear gloves if needed. Keep it away from children. It is safe when used correctly. It helps clean water efficiently.

(Factory White Powder Cationic Anionic Nonionic Polymer Flocculant Polyacrylamide)

Applications of Factory White Powder Cationic Anionic Nonionic Polymer Flocculant Polyacrylamide

Factory white powder cationic anionic nonionic polymer flocculant polyacrylamide is important for water treatment. It helps bring small particles together. This makes them form larger clumps. These larger clumps settle out of water much faster. Cleaner water results from this process. Different types exist for different jobs.

Cationic polyacrylamide carries a positive charge. It works very well against organic matter. Organic matter often has a negative charge. The positive charge attracts the negative particles. This is common in treating municipal sewage. It also helps with paper mill waste. Industrial wastewater often contains lots of organics. Cationic PAM helps here too. It makes sludge thicker and easier to handle.

Anionic polyacrylamide carries a negative charge. It works best with mineral particles. Mineral particles usually have a positive charge. The negative charge pulls them together. Mining operations use it a lot. It helps separate minerals from waste rock slurry. Coal washing plants rely on it. Sand washing processes need it too. It clarifies water by settling out fine sand and silt. Anionic flocculant is good for mineral processing wastewater.

Nonionic polyacrylamide has no strong charge. Its main power is bridging particles physically. It works well in sensitive situations. The water conditions might vary in pH or salt content. Other flocculants might struggle here. Nonionic types perform more steadily. They help in oil extraction sometimes. They aid in certain chemical processes too. They are versatile when the water chemistry is tricky.

These flocculants are vital in many industries. They help clean water efficiently. They reduce the time needed for solids to settle. They improve the clarity of treated water. They make sludge dewatering easier. Factories and plants depend on them. They come as a white powder for easy storage and mixing. Workers dissolve them in water before adding to the treatment process. The correct type must be chosen for the specific waste.

Company Introduction

Welcome to Robocup, a premier global supplier of high-quality surfactants. Our extensive range includes anionic, cationic, nonionic, and amphoteric surfactants, catering to industries such as personal care, textiles, cleaning, and industrial applications. With advanced manufacturing facilities and rigorous quality control, we ensure that our products meet the highest international standards. We pride ourselves on our commitment to innovation, sustainability, and customer satisfaction. Our dedicated team provides tailored solutions to meet your specific needs. Partner with us for reliable, high-performance surfactants that drive your business forward. Explore our offerings and discover the difference today.

If you have any questions, please feel free to contact us(nanotrun@yahoo.com).

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of Factory White Powder Cationic Anionic Nonionic Polymer Flocculant Polyacrylamide

What is polyacrylamide flocculant used for? This white powder helps clean water. It makes tiny particles stick together. These clumps are easier to remove. Factories use it in wastewater treatment plants. Mines also use it for processing water. It helps separate solids from liquids efficiently.

What’s the difference between cationic, anionic, and nonionic types? Cationic polymer has a positive charge. It works well with negatively charged particles like sludge. Anionic polymer has a negative charge. It suits positively charged particles such as clays or metal hydroxides. Nonionic polymer has no charge. It works best with neutral particles or when charges are mixed.

How do you use this polymer? First, mix the powder with water. Create a solution. This solution is then added to the dirty water. The amount needed varies. It depends on how dirty the water is. Start with a small dose. Adjust as needed. Too much can cause problems.

Is polyacrylamide flocculant safe? Handle it carefully. Wear gloves and safety glasses. Avoid breathing in the dust. Keep it away from your eyes and skin. It is generally safe when used correctly. Follow the safety instructions on the container.

How should you store this flocculant? Store the bags in a cool, dry place. Keep them away from moisture. Moisture makes the powder sticky. It becomes hard to use. Keep the bags sealed tightly when not in use. This prevents moisture and keeps the powder dry.

(Factory White Powder Cationic Anionic Nonionic Polymer Flocculant Polyacrylamide)