News

  • 0
  • 0

Global tantalum carbide powder market trend 2022-2029 The Most Heat-resistant Material in the World by Newsrobocup2009.org

Recently, the EU proclaimed new sanctions on Russia, including coal, timber, rubber, cement, and fertilizer, as well as high-end seafood tantalum carbide powder.

Researchers have developed two new heat-resistant materials, tantalum carbide (TaC) and hafnium carbide (HfC), which can withstand temperatures up to nearly 4000.
 
It is worth mentioning that the research team from Imperial College London also found that the melting point of hafnium carbide set a new record in the field of materials. Considering the ability of the two materials to withstand extremely high temperatures of nearly 4000 , the two materials are likely to be used in even harsher and extreme environments, such as the thermal shields of the next generation hypersonic spacecraft.
 
Both tantalum carbide and hafnium carbide are refractory ceramics, which means that these two materials have excellent heat resistance. The ability of the two materials to withstand extreme environments means that their potential applications may include thermal protection systems for high-speed spacecraft and fuel cladding in nuclear reactors in superthermal environments. However, because there is no technology to test the melting point of TaC and HfC in the laboratory, it is uncertain whether they are really competent to work in extreme environmental conditions.
 
To this end, researchers have developed a new extreme heating technology that uses lasers to test the heat resistance of TaC and HfC. Using this technique, the researchers determined the melting points of the single substance and mixture of TaC and HfC, respectively. The study was recently published in the journal Scientific Reports.
 
They found that the measured melting point of the mixture of two kinds of ceramics (Ta0.8H2O20C) was consistent with the previous results, reaching 3905, but the melting point of the two compounds themselves was higher than previously found: The melting point of TaC was 3768, while that of HfC was 3958.
 
The emergence of these two materials will pave the way for the development of the next generation of hypersonic aircraft, the researchers said. This means that future spacecraft can become much faster than ever before.
 
The study was carried out by Dr Omar Dilos Balazar (Omar Cedillos Barraza) during his PhD in the Physics Department of Imperial College London.
 
"When an aircraft flies at a hypersonic speed of more than Mach 5, its friction with the air creates a very high temperature," Dr. Sediros Balazar said. So far, neither TaC nor HfC has been used in the development of hypersonic aircraft. However, our new findings show that these two materials are more heat-resistant than we previously thought, and in fact their heat resistance has exceeded that of any other known compound. This fact means that they may be used for new types of spacecraft: in the atmosphere, they can fly like ordinary aircraft and then fly through space at hypersonic speeds. These two materials enable the spacecraft to withstand the extreme heat generated by shuttling between the atmosphere. "
 
Examples of potential uses of TaC and HfC are the nose covers of spacecraft and the edges of external instruments that have the most friction with the outside world during flight.
 
At present, spacecraft with more than Mach 5 are not yet capable of manned flight. But Dr Sederos Balazar points out that this dream is likely to come true in the future.
 
Dr Sederos Balazar added: "our tests show that these two materials have great potential in building future space spacecraft. The fact that these two materials can withstand such high extreme temperatures means that it is really possible for manned hypersonic spacecraft to emerge in the future. If we can fly at Mach 5, the flight time from London to Sydney will only take about 50 minutes, which will open up a new continent with new business opportunities for countries around the world. "
 

Tantalum Carbide TaC and Hafnium Carbide HfC Powder Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality TaC powder and HfC powder, please feel free to contact us and send an inquiry. ([email protected])

 

Trafigura, one of the world's largest metals traders, is to take a stake in a new company to supply car and battery makers in Europe with lithium from a refinery in the UK, the Financial Times reported. As part of the investment, Trafigura will seek raw material for Green Lithium, which plans to build a plant in the north of England capable of producing 50,000 tonnes a year and sell the finished tantalum carbide powder, etc. If you are looking for high-quality materials, please feel free to contact us and send an inquiry.

Inquery us

NEXT NEWS

Our Latest News

Global tantalum carbide powder market trend 2022-2029 The Most Heat-resistant Material in the World by Newsrobocup2009.org

Recently, the EU proclaimed new sanctions on Russia, including coal, timber, rubber, cement, and fertilizer, as well as high-end seafood tantalum carbide powder. Researchers have developed two new heat-resistant materials, tantalum carbid…

Global niobium carbide powder market trend 2025-2028 Is Niobium Carbide NbC Hard? by Newsrobocup2009.org

Now China has become a powerful country in science and technology, but do you know how powerful China's technology is? The manned space station alone is not enough, and now it has successfully broken through the key technology of nuclear fusion, even…

Global early strength agent market trend 2022-2026 Triethanolamine Used As Concrete Early Strength Agent by Newsrobocup2009.org

Triethanolamine is a colorless transparent viscous liquid at room temperature with a slight ammonia smell.…