Overview of Anionic Surfactant

Anionic surfactants are a class of surface-active agents characterized by their negatively charged hydrophilic (water-loving) head groups. These surfactants are widely used in various applications, including detergents, cleaning agents, and personal care products. They excel at removing dirt and oils due to their strong emulsifying and foaming properties. Common types include sodium lauryl sulfate (SLS) and linear alkylbenzene sulfonates (LAS).

Features of Anionic Surfactant

Emulsification: Effective at breaking down oils and fats into smaller droplets, making them easier to wash away.

Foaming Properties: Generate rich, stable foam that enhances cleaning efficiency.

Detergency: Strong ability to lift and remove dirt and grease from surfaces.

Solubility: Highly soluble in water, facilitating easy rinsing and dispersion.

Stability: Stable under a wide range of temperatures and pH levels, ensuring consistent performance.

Compatibility: Often compatible with other surfactants and additives, allowing for versatile formulations.

Cost-Effectiveness: Generally more affordable compared to other types of surfactants, making them popular in mass-market products.

(PAM Polymer Anionic Polyacrylamide Apam)

Specifications of PAM Polymer Anionic Polyacrylamide Apam

PAM Polymer Anionic Polyacrylamide (APAM) is a water-soluble polymer. It is widely used for water purification and soil conditioning. Understanding its specifications is important for choosing the right product.

APAM typically appears as a white granule or powder. It dissolves easily in water. Its molecular weight is usually very high. This high molecular weight helps it form large molecular chains in water. These chains are key for its performance.

The anionic degree measures how much negative charge it has. This value can vary. Common anionic degrees range from 10% to 40%. The specific degree needed depends on the application. Higher anionic charge often works better for treating certain types of wastewater.

Solubility is a critical factor. Good APAM dissolves completely in water within one hour. It should form a clear or slightly opalescent solution. Lumps or slow dissolving indicate poor quality. The viscosity of its solution is another key indicator. Higher molecular weight usually means higher viscosity. Viscosity directly relates to its effectiveness in flocculation.

The pH range for APAM solutions is broad. It generally works well between pH 5 and pH 10. Extreme pH values can reduce its performance. Solid content in the dry powder is normally above 88%. This means the powder is mostly active polymer. Residual moisture makes up the rest.

APAM is primarily used for flocculation. It helps particles in water clump together and settle. This is essential in municipal sewage plants and industrial wastewater treatment. It also finds use in the paper industry and mining. Farmers use it to reduce soil erosion and improve irrigation.

Handle APAM powder with care. Avoid creating dust. Store it in a cool, dry place. Keep it away from moisture. Always follow the supplier’s instructions for dissolving and dosing. Proper preparation ensures the best results.

(PAM Polymer Anionic Polyacrylamide Apam)

Applications of PAM Polymer Anionic Polyacrylamide Apam

Anionic Polyacrylamide (APAM) is a water-soluble polymer. It finds many uses across different industries. Its main job is making tiny particles clump together. This process is called flocculation. Flocculation helps separate solids from liquids efficiently.

Water treatment plants rely heavily on APAM. It treats municipal sewage effectively. APAM makes the sludge thicker. This sludge settles much faster. Cleaner water results. Industrial wastewater also needs treatment. Factories producing textiles, paper, or chemicals use APAM. It removes pollutants. APAM helps meet environmental discharge standards.

Mining operations use APAM for tailings management. Ore processing creates slurry waste. APAM thickens this slurry. It allows more water recovery. Safer, more stable tailings dams are built. Mineral processing benefits too. APAM improves the separation of valuable minerals from waste rock. Concentrate quality increases. Less product is lost.

Agriculture uses APAM as a soil conditioner. Dry, sandy soils lose water quickly. Applying APAM helps the soil hold moisture. It also reduces soil erosion caused by wind and rain. Better crop growth often follows. APAM helps form stable soil aggregates.

The oil and gas industry applies APAM for drilling fluids. It controls fluid viscosity and fluid loss. APAM aids in friction reduction within pipelines. Paper mills use APAM to improve retention. More fibers and fillers stay in the paper sheet during formation. Paper strength improves. Production efficiency increases. APAM serves as a drainage aid on the paper machine wire section too.

APAM is a versatile chemical. Its ability to bind particles makes it essential. It solves separation and stability problems in many sectors. Environmental protection and industrial efficiency are key outcomes.

Company Introduction

Welcome to Robocup, a premier global supplier of high-quality surfactants. Our extensive range includes anionic, cationic, nonionic, and amphoteric surfactants, catering to industries such as personal care, textiles, cleaning, and industrial applications. With advanced manufacturing facilities and rigorous quality control, we ensure that our products meet the highest international standards. We pride ourselves on our commitment to innovation, sustainability, and customer satisfaction. Our dedicated team provides tailored solutions to meet your specific needs. Partner with us for reliable, high-performance surfactants that drive your business forward. Explore our offerings and discover the difference today.

If you have any questions, please feel free to contact us(nanotrun@yahoo.com).

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of PAM Polymer Anionic Polyacrylamide Apam

What is PAM Polymer Anionic Polyacrylamide (APAM)?
APAM is a water-soluble polymer. It’s a long chain molecule. This chain has a negative charge. We make it from acrylamide and acrylic acid. It’s very good at changing how water and particles act together. It’s mainly used for cleaning water and making solids settle.

Where is APAM commonly used?
APAM sees heavy use in wastewater treatment plants. Factories use it too. It helps clean water from mining, paper making, and textiles. Cities use APAM in their sewage treatment. It’s also used in oil drilling fluids. Farmers sometimes use it to stop soil washing away.

How does APAM work?
APAM molecules have a negative charge. Tiny particles in dirty water often have a positive charge. Opposite charges attract. The APAM chain grabs these particles. It pulls them together. This makes bigger, heavier clumps. These sticky clumps sink fast. This separates the solids from the water. The water gets cleaner.

What benefits does APAM offer?
APAM works very well at low doses. A little bit does a lot. It makes solids settle much faster. This saves time. It also improves the clarity of the cleaned water. Using APAM can reduce the need for other chemicals. This might save money. It helps manage sludge better. The process becomes more efficient overall.

Is APAM safe to handle?
APAM itself has low toxicity. Handle the dry powder carefully. Wear gloves and a dust mask. Avoid breathing the dust. Keep it away from your eyes. Good ventilation is important. The powder can be slippery if spilled. Once dissolved in water, it’s much safer to handle. Always follow the supplier’s safety instructions.

(PAM Polymer Anionic Polyacrylamide Apam)